Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Here is the part we need to replace with a new LCD lens.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a hairdryer or heat gun, heat up the lens for removal. This should not take longer than 30 seconds.
-
Now using a suction cup, I used a suction from a sponge,apply the suction cup to the plastic lens. Now just pull the lens away from the camera to remove the old lens. This may require a small amount of force.
-
If it does not want to budge, try reheating.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
At this step you may need to reheat the bottom of the lens if it does not come fully off.
-
You may need to cover the cracked area of the screen with a screen protector, or just regular packing tape. After removal, clean off remaining adhesive.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
After removal, make sure to remove all pieces of the old lens. Checking for fragments of plastic, and dust on the LCD.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now grab your new adhesive tape from your new lens, and apply to the camera side only.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once lined up apply pressure around the sticker until the tape is firmly in place
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the protective film from the screen and apply to your camera. Make sure everything is lined up, and placed properly.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
You now have a camera that looks like it just came out of the box!
-
Cancelar: No complete esta guía.
12 personas más completaron esta guía.
8 comentarios
Thank you for making this guide, it helped me fix my camera!
Randy
Um, that's a window, not a lens.
Sarcasm I hope?
Great guide, thank you for posting it. Fixed my 5DM2 in under 5 minutes!
But where do i buy the windowglas?
