Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull up on both sides of the the eyepiece cap. It should come off with little pressure.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two screws hidden under the viewfinder eyepiece cap.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel off the rubber grip on the back by grasping one of the corners and pulling it away from the camera body.
-
Once removed, a hidden screw is revealed.
-
Remove both screws from the rear of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two indicated screws from the bottom of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the lock on the flex cable connector up with a spudger.
-
The front panel should pop off, now that the cable has been disconnected.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.