Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

The audio cable is easy to remove. This requires absolutely no repair skills.

  1. To start, make sure that the headphones are disconnected from any audio source.
    • To start, make sure that the headphones are disconnected from any audio source.

  2. Fold the earpads flat.
    • Fold the earpads flat.

  3. Pull off the earpad. When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.
    • Pull off the earpad.

    • When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

  4. Take the audio cable out of the clip.
    • Take the audio cable out of the clip.

  5. Pull out the audio cable.
    • Pull out the audio cable.

  6. Headphones remain.
    • Headphones remain.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Ashley Ryan

Miembro Desde 25/03/12

5,168 Reputación

3 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

294 Miembros

962 Guías creadas

I replaced cable once and all was fine. Now left side only not working. Could it be something else or just time for a new cable?

Jayrosen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 25

Ultimos 30 días: 120

Todo El Tiempo: 6,347