Cancelar

Bowers and Wilkins P5 Headphones Audio Cable Replacement

Escrito Por: Ashley Ryan

Comentarios: 1
Favoritos: 1
Terminaciones: 3

Bowers and Wilkins P5 Headphones Audio Cable Replacement

Dificultad

Fácil

Pasos

6

Tiempo Requerido

2 minutos

Introducción

The audio cable is easy to remove. This requires absolutely no repair skills.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

Paso 1 Earpads

To start, make sure that the headphones are disconnected from any audio source.

To start, make sure that the headphones are disconnected from any audio source.

Paso 2

Fold the earpads flat.

Fold the earpads flat.

Paso 3

Pull off the earpad.

When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

Pull off the earpad.
When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

Paso 4 Audio Cable

Take the audio cable out of the clip.

Take the audio cable out of the clip.

Paso 5

Pull out the audio cable.

Pull out the audio cable.

Paso 6

Headphones remain.

Headphones remain.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

Ashley Ryan

Miembro Desde 25/03/12

5,066 Reputación

4 Guías creadas

+ 32 más insignias

Equipo

Master Techs Miembro de Master Techs

Community

285 Miembros

800 Guías creadas

0 Comentarios

Agregar un comentario

Ver Estadísticas:

Ultimas 24 Horas: 3

Últimos 7 Días: 16

Últimos 30 Días: 89

Todo El Tiempo: 4,394