Saltar al contenido principal

Black and Decker CM0700BZ Water Tank Replacement

Qué necesitas

  1. Black and Decker CM0700BZ Water Tank Replacement, Lid: paso 1, imagen 1 de 2 Black and Decker CM0700BZ Water Tank Replacement, Lid: paso 1, imagen 2 de 2
    • Open the lid of the coffee maker.

    • Remove the brew cup.

  2. Black and Decker CM0700BZ Water Tank Replacement: paso 2, imagen 1 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 2, imagen 2 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 2, imagen 3 de 3
    • Place your finger, screwdriver, or spudger behind the corner of the tab.

    • Pull up on the tab until it disconnects from the coffee maker.

  3. Black and Decker CM0700BZ Water Tank Replacement: paso 3, imagen 1 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 3, imagen 2 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 3, imagen 3 de 3
    • Hold the tab while pushing back on the lid.

    • The lid should open fully with the top of the lid facing down.

  4. Black and Decker CM0700BZ Water Tank Replacement: paso 4, imagen 1 de 2 Black and Decker CM0700BZ Water Tank Replacement: paso 4, imagen 2 de 2
    • Insert the flathead screwdriver or spudger into one of the inserts holding the lid.

    • Pry facing away from the lid to force the peg out.

    • You should hear a pop when it disconnects.

    • Hold the lid and pull it away from the other insert.

  5. Black and Decker CM0700BZ Water Tank Replacement: paso 5, imagen 1 de 1
    • To also remove the shower head, use the Shower Head guide.

  6. Black and Decker CM0700BZ Water Tank Replacement, Water Tank: paso 6, imagen 1 de 2 Black and Decker CM0700BZ Water Tank Replacement, Water Tank: paso 6, imagen 2 de 2
    • Remove the carafe holder from the bottom of the coffee machine.

  7. Black and Decker CM0700BZ Water Tank Replacement: paso 7, imagen 1 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 7, imagen 2 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 7, imagen 3 de 3
    • Place coffee maker on its side, with the bottom facing you.

    • Remove two 10mm Phillips #1 screws and one 10mm Tri-Point Y1 screws with their designated tips.

  8. Black and Decker CM0700BZ Water Tank Replacement: paso 8, imagen 1 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 8, imagen 2 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 8, imagen 3 de 3
    • Slowly pry the bottom lid from the front.

    • You should hear a pop.

    • Pull up and remove the bottom lid.

  9. Black and Decker CM0700BZ Water Tank Replacement: paso 9, imagen 1 de 1
  10. Black and Decker CM0700BZ Water Tank Replacement: paso 10, imagen 1 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 10, imagen 2 de 3 Black and Decker CM0700BZ Water Tank Replacement: paso 10, imagen 3 de 3
    • Remove the four 10 mm Phillips #1 screws.

    • Slowly pull the water tank up to expose the water pipes

  11. Black and Decker CM0700BZ Water Tank Replacement: paso 11, imagen 1 de 2 Black and Decker CM0700BZ Water Tank Replacement: paso 11, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Squeeze on the prongs with tweezers and hold.

    • Pull the water tank while squeezing the tighteners to loosen the water pipes off of the water tank.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Shawn Robichaud

Miembro Desde 10/26/22

729 Reputación

4 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 26

Todo El Tiempo: 235