Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
This guide will show you how to replace the [main] LCD screen on the Audiovox CDM-8900.
Qué necesitas
-
-
Remove screw covers (4 in total) using the spudger.
-
Note: Because the bottom two screw covers are attached with an adhesive, you will not be able to replace them when you reassemble the phone.
-
-
-
WARNING: The small electronic components inside the phone are fragile; take care not to damage them when completing this step.
-
Wedge one of the plastic opening tools under the faceplate near the hinge.
-
Insert the second plastic opening tool under the faceplate and slide it around the perimeter, detaching the faceplate from the phone.
-
-
-
-
WARNING: Do not detach or tear any wires when completing this step.
-
Using the spudger, carefully separate the black discs (speaker and microphone) from the inside surface of the phone.
-
Note: The smaller black disc is glued down, so you may need to use some force to detach it. Both disks will still remain attached via wires.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.