Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Separate the tablet from the base by pressing the large silver button below the tablet. The silver button is located at the base of the tablet.
-
Remove the tablet by lifting up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the opening tool into the seam of the tablet casing and gently pry upwards.
-
With a little force, you will feel the clips release.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide the tool along all four edges of the tablet, making sure that all the clips are released.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pull back the yellow transparent plastic covering on top of the battery connection port.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate the device so the top of the screen is facing you. Place the plastic opening tool underneath the battery and gently pry upwards to lift the battery out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the battery by slowly peeling the battery away from the connected side.
-
The adhesive on the back will pull away from the battery.
-
Cancelar: No complete esta guía.
68 personas más completaron esta guía.
Equipo
Cal Poly, Team 13-31, Maness Spring 2014 Miembro de Cal Poly, Team 13-31, Maness Spring 2014
CPSU-MANESS-S14S13G31
3 Miembros
6 Guías creadas
22 comentarios
So I switched out my screen for it and its not turning on and I checked it everything was correctly place, but my Asus transformer was dead before hand so I tried charging it, and it wasn't charging, so I checked it and it seems the battery wire harness is loose enough to come off, is it possible to fix that?
Hi christian! How did you solve this problem? That happened to me too...
Part number is C12N1320. They are available from a variety of sources.
