Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the eight 1 cm Phillips head screws from the back panel of the AlphaSmart Pro with the Phillips #00 Screwdriver.
-
Carefully separate the front panel from the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
To remove the ribbon cable, use the spudger to lift each side of the connector from the socket.
-
Gently pull up on the connector to completely remove the connector from the socket.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the front panel removed, locate the lithium coin battery at the top left corner of the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the spudger, plastic opening tool, or your finger/fingernail to lift up the lithium coin battery.
-
Slide the battery out from underneath the clip that holds it in place.
-