Repara tus cosas

Derecho a reparar

Partes y herramientas

Alienware M17x Hard Drive Replacement

Escrito Por: Mosier Locke (y 3 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0
  • Terminaciones: 1

Dificultad

Fácil

Pasos

6

Tiempo Requerido

10 minutos

Secciones

2

Banderas

0

Introducción

If your hard drive is failing or needs updating, use this guide to remove and replace your hard drive.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Turn off your laptop before starting. Flip the laptop over so the model stickers face the ceiling.

    • Turn off your laptop before starting.

    • Flip the laptop over so the model stickers face the ceiling.

    Traducir

  2. Remove the two 3.5 mm Phillips #0 screws holding the cover in place.

    • Remove the two 3.5 mm Phillips #0 screws holding the cover in place.

    • Slide cover forward then carefully lift up.

    Traducir

  3. Kits de Reparación de Pantalla LCD de iPhone

    La opción de presupuesto, cubierta por nuestra garantía de por vida.

    Compra kits

    Kits de Reparación de Pantalla LCD de iPhone

    Reduce los costos de reparación, no la calidad.

    Compra kits

  4. Remove the two 5.5 mm Phillips #0 screws holding the battery in place.

    • Remove the two 5.5 mm Phillips #0 screws holding the battery in place.

    Traducir

  5. Carefully use the Plastic Opening Tool to unplug the battery. Lift the battery up and out to remove.

    • Carefully use the Plastic Opening Tool to unplug the battery.

    • Lift the battery up and out to remove.

    Traducir

  6. With the laptop flipped over, cover removed, and battery removed; continue by locating your hard drive(s).

    • With the laptop flipped over, cover removed, and battery removed; continue by locating your hard drive(s).

    Traducir

  7. Remove the eight 3.5 mm Phillips #0 screws. Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out. Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out.

    • Remove the eight 3.5 mm Phillips #0 screws.

    • Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 16

Ultimos 30 días: 85

Todo El Tiempo: 609