Saltar al contenido principal
Inglés
Español

Traduciendo paso 2

Paso 2
Remove the eight 3.5 mm Phillips #0 screws. Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out. Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out.
  • Remove the eight 3.5 mm Phillips #0 screws.

  • Remove the hard drive(s), using the Plastic Opening Tool by lifting on the edges and pulling the hard drive up and out.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.