Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the laptop over so the model stickers face the ceiling.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 3.5 mm Phillips #0 screws holding the cover in place.
-
Slide cover forward then carefully lift up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two 5.5 mm Phillips #0 screws holding the battery in place.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully use the Plastic Opening Tool to unplug the battery.
-
Lift the battery up and out to remove.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip the laptop back over so that the Alienware logo faces the ceiling then open the lid to view the screen.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger as a lever to pry the black plastic siding off of the frame starting on either of the top corners.
-
Use the spudger to remove the siding from the bottom of the frame near the hinges.
-
Carefully lift the black plastic siding up and out of the hinged area making sure not to break the fragile sides.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the plastic opening tool to disconnect the screen from the top mount.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Tilt the screen forward to expose the connecting wires.
-
Disconnect said wires to then lift the display assembly out of the frame.
-