Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

AARP RealPad MA7BX2 Back Cover Replacement

Qué necesitas

  1. AARP RealPad MA7BX2 Back Cover Replacement, Back Cover: paso 1, imagen 1 de 2 AARP RealPad MA7BX2 Back Cover Replacement, Back Cover: paso 1, imagen 2 de 2
    • Loosen the back cover using the suction cup.

    • Pull up on the center of the back with the suction cup.

    • Pull up on all four corners of the back with the suction cup.

  2. AARP RealPad MA7BX2 Back Cover Replacement: paso 2, imagen 1 de 1
    • Remove the back cover by gently placing the small opening tool in the crevice created by loosening the back.

    • Slide the opening tool around the edges of the device.

    • Wedge it open using the opening tool.

    • Use the suction cup again if you're having trouble removing the back cover.

  3. AARP RealPad MA7BX2 Back Cover Replacement: paso 3, imagen 1 de 2 AARP RealPad MA7BX2 Back Cover Replacement: paso 3, imagen 2 de 2
    • The black tape is stuck to delicate wires; remove with caution.

    • Peel off the silver tape.

    • Gently pull off the black tape.

  4. AARP RealPad MA7BX2 Back Cover Replacement: paso 4, imagen 1 de 2 AARP RealPad MA7BX2 Back Cover Replacement: paso 4, imagen 2 de 2
    • Using the JIS #000 screwdriver, remove the two 2.5mm screws.

  5. AARP RealPad MA7BX2 Back Cover Replacement: paso 5, imagen 1 de 2 AARP RealPad MA7BX2 Back Cover Replacement: paso 5, imagen 2 de 2
    • Lift off the black audio cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 8

Todo El Tiempo: 802