Editando DualSense Controller v1

Categoria

Inicio / Game Console / Sony Game Console / PlayStation Controller / DualSense Controller v1

Imágenes existentes adjuntadas a este wiki:

Esta traducción puede estar desactualizada

Mostrar Cambios

	[summary_image\|2281292]

-	[title\|DualSense Controller v1]
+	[title\|DualSense Controller V1]

-	[~~summary]Repair documentation for the initial Sony PlayStation 5~~ DualSense ~~controller.~~
+	[page_title\|DualSense Controller V1 Repair]

-	Model number: CFI-ZCT1W
-	FCC ID: AK8CFIZCT1[/summary]
+	[summary]Repair guides, disassembly, and troubleshooting information for the first generation Sony PlayStation 5 DualSense controller, successor to the DualShock series. Identified by model number CFI-ZCT1W and motherboard model BDM-010.[/summary]



	[guidelist\|device=PlayStation 5\|type=teardown]

-	== Background ~~and Identification~~ ==
+	== Background ==

-	Released alongside the PlayStation 5, the DualSense controller was designed as the successor to the DualShock 4 used with the PlayStation 4. ~~This controller can be identified by the unique design compared to last generation, and the use of USB-C instead of MicroUSB as the primary ways to quickly identify the controller.~~
+	Released alongside the PlayStation 5, the DualSense controller was designed as the successor to the DualShock 4 used with the PlayStation 4.

-	Other identifying marks include the FCC ID (AK8CFIZCT1) and IC ID (409B-CFIZCT1). *''IMPORANT: CFI-ZCT1WA models use a similar FCC ID, but add an A at the end.''*
+	== Identification ==
+
+	This controller can be identified by its unique design compared to the last generation, and the use of USB-C instead of MicroUSB as the primary ways to quickly identify the controller.
+
+	Other identifying marks include the FCC ID (AK8CFIZCT1) and IC ID (409B-CFIZCT1). *''IMPORTANT: CFI-ZCT1WA models use a similar FCC ID but add an A at the end.''*
+
+	Although all regular DualSense controllers use the same model number (CFI-ZCT1W), Sony often updates the controller's internals. Repair procedures vary between models.
+
+	To tell what version DualSense controller you have without disassembly, find the serial number printed on the back. It's usually 17 characters long and starts a letter, like E, F, or G. The second digit in the serial number is the version number, 1–5 correlating to V1–V5. For example, if the second digit is a *1, your controller is a V1*.
+
+	Alternatively, scanning the QR code on the controller's back will return the same serial number—and the second digit is the version number. On iPhones, you may need a 3rd party QR code scanner application.
+
+	Internally, the versions correspond to motherboard models, namely BDM-010, BDM-020, BDM-030, BDM-040, and BDM-050.
+
+	[image\|3501381]
+
+	[image\|3501384]

	== News ==

Inglés

Título de página

Título de Pantalla

Resumen

Repair guides, disassembly, and troubleshooting information for the first generation Sony PlayStation 5 DualSense controller, successor to the DualShock series. Identified by model number CFI-ZCT1W and motherboard model BDM-010.

Información Adicional

== Teardown ==

[guidelist|device=PlayStation 5|type=teardown]

== Background ==

Released alongside the PlayStation 5, the DualSense controller was designed as the successor to the DualShock 4 used with the PlayStation 4.

== Identification ==

This controller can be identified by its unique design compared to the last generation, and the use of USB-C instead of MicroUSB as the primary ways to quickly identify the controller.

Other identifying marks include the FCC ID (AK8CFIZCT1) and IC ID (409B-CFIZCT1). ***''IMPORTANT: CFI-ZCT1WA models use a similar FCC ID but add an A at the end.''***

Although all regular DualSense controllers use the same model number (CFI-ZCT1W), Sony often updates the controller's internals. Repair procedures vary between models.

To tell what version DualSense controller you have without disassembly, find the serial number printed on the back. It's usually 17 characters long and starts a letter, like E, F, or G. The second digit in the serial number is the version number, 1–5 correlating to V1–V5. For example, if the second digit is a ***1***, your controller is a ***V1***.

Alternatively, scanning the QR code on the controller's back will return the same serial number—and the second digit is the version number. On iPhones, you may need a 3rd party QR code scanner application.

Internally, the versions correspond to motherboard models, namely BDM-010, BDM-020, BDM-030, BDM-040, and BDM-050.

[image|3501381]

[image|3501384]

== News ==

After reports of [link|https://www.ifixit.com/News/48944/heres-why-ps5-joysticks-drift-and-why-theyll-only-get-worse|joystick “drift” in PS5 DualSense controllers], an iFixit investigation revealed the cause.

== PC Use ==

This is currently in testing. ***IMPORTANT:*** DS4Windows 2.1.17 or newer is REQUIRED. At this time, the DualSense is not compatible with InputMapper like the older DualShock 4 controller.

=== Connection Options ===

* USB-C

It is possible to connect the controller to a PC over a wire with a USB-C cable. Make sure the cable is reasonably long and USB-IF certified if you go this route. Your cable range will be limited by your cable and the USB-C specification.

* Bluetooth

If you need to go beyond the USB-C specifications, Bluetooth is supported on these controllers.

[br]
***CAUTION:*** Bluetooth performance is dependent on what chipset your receiver uses, or chipset used by your computer (often integrated into the wireless card, especially on somewhat recent computers). While most Bluetooth chipsets are reasonably compatible with this controller outside of the nonstandard items like the trackpad, some chipsets can be troublesome, primarily chipsets like Broadcom. As long as your laptop has a quality wireless card (or one can be installed, like an Intel/QCA ath10k based card), this can usually be remedied without use of an external adapter.[br]
***If you cannot change your card easily (or do not want to open your computer), a USB “CSR 4.X” adapter (that is verified to be compliant with the CSR specification) can also be used.***

Documentos Adjuntos

0 Documentos Añadir un Documento

Español

[title|DualSense Controller v1]

[summary]Documentación de reparación para el mando DualSense de Sony PlayStation 5.

Número de modelo: CFI-ZCT1W[/summary]

[summary_image|2281292]

== Desmontaje ==

[guidelist|device=PlayStation 5|type=teardown]

== Antecedentes ==

Lanzado junto con la PlayStation 5, el mando DualSense se diseñó como sucesor del DualShock 4 utilizado con la PlayStation 4.

== Identificación ==

Este mando se puede identificar por su diseño único en comparación con la generación anterior, y el uso de USB-C en lugar de MicroUSB como principales formas de identificar rápidamente el mando.

Otras marcas identificativas son el ID FCC (AK8CFIZCT1) y el ID IC (409B-CFIZCT1). ***''IMPORTANTE: Los modelos CFI-ZCT1WA utilizan un ID FCC similar pero añaden una A al final.''***

== Noticias ==

Tras los informes de [link|https://www.ifixit.com/News/48944/heres-why-ps5-joysticks-drift-and-why-theyll-only-get-worse|"deriva" del joystick en los mandos DualSense de PS5], una investigación de iFixit reveló la causa.

== Uso en PC ==

Actualmente está en pruebas. ***IMPORTANTE:*** Se REQUIERE DS4Windows 2.1.17 o posterior. En este momento, el DualSense no es compatible con InputMapper como el antiguo mando DualShock 4.

=== Opciones de conexión ===

* USB-C

Es posible conectar el controlador a un PC a través de un cable con un cable USB-C. Asegúrese de que el cable es razonablemente largo y USB-IF certificado si usted va esta ruta. El alcance del cable estará limitado por el cable y la especificación USB-C.

* Bluetooth

Si necesitas ir más allá de las especificaciones USB-C, Bluetooth es compatible con estos controladores.

[br]
***ATENCIÓN:*** El rendimiento de Bluetooth depende del chipset que utilice tu receptor, o del chipset que utilice tu ordenador (a menudo integrado en la tarjeta inalámbrica, especialmente en ordenadores algo recientes). Mientras que la mayoría de los chipsets Bluetooth son razonablemente compatibles con este controlador fuera de los elementos no estándar como el trackpad, algunos chipsets pueden dar problemas, principalmente chipsets como Broadcom. Mientras su portátil tenga una tarjeta inalámbrica de calidad (o se pueda instalar una, como una tarjeta basada en Intel/QCA ath10k), esto normalmente se puede solucionar sin necesidad de usar un adaptador externo[br]
***Si no puedes cambiar la tarjeta fácilmente (o no quieres abrir el ordenador), también se puede utilizar un adaptador USB "CSR 4.X" (que se haya verificado que cumple la especificación CSR).***