Repara tus cosas Comunidad Tienda

iomega LDHD250-U Teardown

Qué necesitas

  1. iomega LDHD250-U Teardown, Remove Rear Screws: paso 1, imagen 1 de 1

    • Remember to power off and unplug the unit before opening it up!

    • Remove the two PH #0 Screws

    Editar

  3. iomega LDHD250-U Teardown, Removing the cover: paso 2, imagen 1 de 2 iomega LDHD250-U Teardown, Removing the cover: paso 2, imagen 2 de 2

    • After removing the back part of the unit, slide the front part out.

    • Remember to put aside the center part you removed

    Editar

  4. iomega LDHD250-U Teardown, Removing the Hard Drive: paso 3, imagen 1 de 3 iomega LDHD250-U Teardown, Removing the Hard Drive: paso 3, imagen 2 de 3 iomega LDHD250-U Teardown, Removing the Hard Drive: paso 3, imagen 3 de 3

    • There are two ways to remove the Hard Drive

    • 1. Removing the 4 screws on the side of the unit

    • 2. Sliding the HDD back and then releasing it (my unit will not slide back)

    • The HDD can now be lifted out, unplugged, and replaced, upgraded, or keep it the same.

    • Pull up and unplug as the cables can break if too much force is applied

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Nate Pritzker

Miembro Desde 10/12/17

431 Reputación

2 Guías creadas

Insignias: 11

+ 8 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 31

Todo El Tiempo: 1,015