Repara tus cosas Comunidad Tienda

ViewSonic VG2438Sm Teardown

Escrito Por: Quanten (y otro participante)
Publicado: September 13, 2023
  • Comentarios: 0
  • Favoritos: 0
  • Vistas: 284

ViewSonic VG2438Sm Teardown

Escrito Por: Quanten (y otro participante)
Publicado: September 13, 2023
  • Comentarios: 0
  • Favoritos: 0
  • Vistas: 284

Teardown

Introducción

A short look inside a ViewSonic VG2438Sm


Model No: VS15964

Este desmontaje no es una guía de reparación. Para reparar tu ViewSonic VG2438Sm, utiliza nuestros manuales de servicio .

  1. ViewSonic VG2438Sm Teardown, Type Label: paso 1, imagen 1 de 1

    • Model No. VS15964

    Editar

    • Remove the stand by unscrewing the four Philips screws at the Vesa mount

    Editar

  3. ViewSonic VG2438Sm Teardown, Open Case: paso 3, imagen 1 de 2 ViewSonic VG2438Sm Teardown, Open Case: paso 3, imagen 2 de 2

    • Open the case by prying on the edge with a suitable tool. I had to use a a opening pick to open the gap wide enough to be able to insert a flat screwdriver.

    • After inserting the screwdriver or a jimmy, bend the handle to the backside of the monitor. So that you lift the front bezel from the hooks and free it.

    • After opening two edges, be careful, since the panel and the logic board are only held in place by the closed case.

    • You probably will damage the case a bit during the process.

    Editar

  5. ViewSonic VG2438Sm Teardown, Flip the Case Open: paso 4, imagen 1 de 2 ViewSonic VG2438Sm Teardown, Flip the Case Open: paso 4, imagen 2 de 2

    • Flip the back side of the case to the right

    • Be careful with the wire to the USB hub. It's just long enough to flip the case and lay it down.

    Editar

  6. ViewSonic VG2438Sm Teardown, Panel Details: paso 5, imagen 1 de 1

    • A Samsung LTM240CL04 panel

    • 1920(RGB)×1200, WUXGA 94PPI

    • Active Area 518.4(W)×324(H) mm

    Editar

  7. ViewSonic VG2438Sm Teardown, The Logic Board: paso 6, imagen 1 de 1

    • Here is the PSU and the logic board.

    • This is not secured against the panel. It's only laying on it and is held in place by the back side of the case.

    Editar

  8. ViewSonic VG2438Sm Teardown, USB Hub: paso 7, imagen 1 de 1

    • The USB Hub is a separate module

    Editar

  9. ViewSonic VG2438Sm Teardown, The Opening Reason: paso 8, imagen 1 de 2 ViewSonic VG2438Sm Teardown, The Opening Reason: paso 8, imagen 2 de 2

    • After this monitor was shipped there was a lose thing, that was making sound when moving the monitor.

    • Since I didn't know what was making the sound and it could have been conductive, I wanted to check the inside before powering it up. Thankfully it were only some plastic things.

    • They probably came lose from the back cover, where they hold the logic board in place.

    Editar

Autor

con 1 otro colaborador

Quanten

Miembro Desde 05/21/18

1,013 Reputación

5 Guías creadas

Insignias: 7

+ 4 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 31

Todo El Tiempo: 284