Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Este teardown está en en curso – Recarga periódicamente para ver los cambios más recientes!

Herramientas Destacadas en este Teardown

  1. Use your iFixit Pro Tech Knife to slice and pry the different colored front and rear cases apart, as shown Use your iFixit Pro Tech Knife to slice and pry the different colored front and rear cases apart, as shown Use your iFixit Pro Tech Knife to slice and pry the different colored front and rear cases apart, as shown
    • Use your iFixit Pro Tech Knife to slice and pry the different colored front and rear cases apart, as shown

  2. Remove the logic board/display assembly from the rear case Remove the logic board/display assembly from the rear case
    • Remove the logic board/display assembly from the rear case

  3. Use your knife to slice off the bottom edge of the sticker found here on the rear of the board Use your knife to slice off the bottom edge of the sticker found here on the rear of the board
    • Use your knife to slice off the bottom edge of the sticker found here on the rear of the board

  4. Use a spudger to gently pry the display away from the logic board Pry softly in each corner of the display, under the black frame Pry softly in each corner of the display, under the black frame
    • Use a spudger to gently pry the display away from the logic board

    • Pry softly in each corner of the display, under the black frame

  5. Seems to be it. The display doesn't appear to be separable from the logic board, sadly, making repairability completely out of the question.
    • Seems to be it. The display doesn't appear to be separable from the logic board, sadly, making repairability completely out of the question.

Nathanael

Miembro Desde 03/02/14

783 Reputación

2 Guías creadas

Equipo

Beautiful Savior Lutheran Church Miembro de Beautiful Savior Lutheran Church

Business

1 Miembro

3 Guías creadas

The display can be separated from the logic board, just pull it free from the logic board connector.

Yuri Silkin - Contestar

My fitbit zip came apart at the seams. I decided to go ahead and clean the screen off since it was coming apart already and the screen looked dusty. Any ideas on how to put it back together? I goes back together and when I hold it everything functions, but I can't get it to stay together. Silicone? Glue? Any suggestions?

sweeney todd - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 2,058