Introducción
Solo quiero mostrarte cómo desarmar tu pantalla de escritorio Acer G246HL.
Qué necesitas
-
-
Primer paso:
-
quitar los tornillos (3)
-
Estos están en la parte de atrás
-
Simplemente retira el pie y desatornilla el tornillo que se encuentra debajo.
-
Continúa con los siguientes dos tornillos, que se encuentran en la entrada HDMI.
-
-
-
Retira la cubierta de la pantalla frontal. Esto está firmemente anclado con 20 clips.
-
Por lo tanto, recomiendo una herramienta para abrir cubiertas para el desmontaje.
-
Se debe tener mucho cuidado al hacer esto, de lo contrario, la cubierta se romperá. Hablo aquí por experiencia.
Remove the screen front cover. This is firmly anchored with 20 clips.
For the dismantling is therefore recommended by me a cover openertool.
Care should be taken when the cover breaks. I speak here from experience.
-
-
Un agradecimiento especial a estos traductores:
100%
¡ Francisco Javier Saiz Esteban nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
Un comentario
Protip for all of you who experience problems turning the monitor on and that orange flickering light when trying so:
REPLACE ALL THE CAPACITORS (at least the bigger ones) IFIXT IT two times this way
First step:
Remove screws (3)
These are on the back
Simply remove the foot and unscrew the screw below.
Continue with the next two screws, which are at the HDMI input.
Richard D. - Contestar