display showing " please Wait "

How can i fix the error of my sony home theater? After power supply screen show WELCOME then went of. then i press turn on button and its showing Please Wait in the screen. nothing working. Not even remote.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 3

Comentarios:

Hi, just verifying, that Sony BDVE450 is the correct model number as it doesn't seem to be listed on the Sony support site?

por

sorry its BDV-E490

por

Pls help me my sony model HCD-FLX5D IS NOT WORKING SAYING PLS WAIT can u say how to clear thee problem and my disc sselect is coming and when i press open button its say pls wait and the speakers are not working

por

Agregar un comentario

3 Respuestas

Solución Elegida

Hi,

Ensure that there is power connected to the player. If the player still tries to start but doesn't get past the 'Please Wait' message try the following and see if it 'resets' your player.

1. Turn off the player.

2. Switch off the power at the wall outlet and remove the power cable from the outlet.

3. Leave the player disconnected for about 1-2 minutes.

4. Reconnect the power cable to the wall outlet and turn on the power at the wall outlet.

5. Turn on the player,

Hopefully this procedure will reset the player.

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Didn't work. Remote doesn't even connect either.

Fue útil esta respuesta?

Calificación 0

Comentarios:

Ihave sony hcd-gzr5d set.allways displayd "please wait".please help me sir

por

Agregar un comentario

I have sony hcd-gzr5d set.all ways displayd please wait.

Fue útil esta respuesta?

Calificación 0
Agregar un comentario

Añadir tu respuesta

Rajdeep Dutta estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 13

Últimos 7 Días: 96

Últimos 30 Días: 451

Todo El Tiempo: 5,295