The RIDGID R86034 is a Lithium Ion impact driver manufactured by RIDGID in 2012.

Preguntas 7 Ver todo

Why won't the drill switch it's direction of rotation?

The drill doesn't change it's direction of rotation when the switch is flipped.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Calificación 2
Agregar un comentario

1 Respuesta

Respuesta Más Útil

There are only a few things that could cause this issue, all of them having to do with the direction of rotation switch.

Check the direction of rotation switch for debris and anything that could be hindering its normal motion. If nothing is stuck, and the switch is free to move, but the direction of rotation doesn’t change, then it’s time to replace your switch. If you replace the switch and it still isn't working properly, there must be an issue with the wires somewhere. Try and see if any wires are stripped or disconnected. If they are then you may have to replace them or reconnect them if possible. This question and more can be answered on the RIDGID X4 18V Lithium-Ion Impact Driver Troubleshooting page.

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Añadir tu respuesta

Brad Foster estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 15

Últimos 30 Días: 108

Todo El Tiempo: 794