The Keurig K75 Platinum Brewing System is a premium single cup home coffee brewing system by Keurig.

Preguntas 21 Ver todo

Slow to brew and cup is not full.

My Keurig seems to be working fine without a K-Cup inserted. However with a K-Cup inserted, the coffee dribbles out very slowly and I only get 1/2 of a serving. I have to brew another smaller cup into the first one to fill my mug. I cannot find anything that is stopped up.

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 11

Comentarios:

I just cleaned my Keurig with white vinegar and got the flow of water coming out really well now, but only when there is no K-Cup or if I use the cup that you fill with your own coffee. I checked the little thing that pierces the bottom of the cup and that tube is clear (I was able to blow water through it with no problem). I'm not sure what else to try so that they machine can use the K-Cups... I have tried different K-Cups too and it has the same issue with them all. The water coffee just dribbles out...

por

I have the same problem as Lyn F. Water flows fine until there is an actual K-Cup in the machine. I tried removing both the "washers" (rubber around the needles) and that didn't help...

por

Have you tried changing the filter in the reservoir?

por

My solenoid is not turning off the bypass.

por

Did all the things suggested at least three times no help! So I decided the pump was getting weak so I and bought a new keurig brewer....SAME PROBLEM!!

My wife suggested I buy brand X cups and I did...PROBLEM SOLVED...I think the grind is too fine in the Keurig cups and plugs the small outlet orifice!!

por

Mostrar 1 comentario más

Agregar un comentario

3 Respuestas

Solución Elegida

Phillip2, check this guide. Slightly different model, but should be pretty much the same idea on yours.

Fue útil esta respuesta?

Calificación 10

Comentarios:

The bottom needle is easier to access if you pop off the bottom of the K-cup holder. Using a small screwdriver, gently lift one of the 2 legs while pulling the bottom off. Once it's off it is really easy to insert a paperclip into the needle. Turn the holder to that you can view the needle from the top and observe the paperclip poking through. You can blow through the needle from the bottom plastic stem too. That was how I found mine was full of grounds.

por

@wildfortune absolutely correct. Step 2 in the guide documents this as well.

por

Thank you SO much! You just saved this broke, desperate for coffee teacher $150! I thought my machine was a gonner but your clean and fix worked like a champ!!

por

I can't get the top off my Keurig I removed the 2 screws and don't see any others! Help!!! Do I need to remove the handle?

por

if you have an air compressor blow air in the needles, that will clear all the ground coffee that is blocking it, simple be creative.

por

Agregar un comentario

I was only getting 2 ounces of coffee to come out. I did not have the keurig cleaner, which cleans the top pin. so i found a small oxy salad dressing container made out of silicon, filled it with water and closed the top part of the unit down on it a few times, creating a suction. then i took a very thin sewing needle and worked it into the pin hole, and re-did the suction routine. i noticed coffee grounds in the water. repeated several times and now my kuerig works good as new. i get 8 ounces of coffee in less than a minute.

Fue útil esta respuesta?

Calificación 0

Comentarios:

What is an oxy salad dressing container?

por

Good instructional, fixed my unit in 10 minutes and the flow is better than ever.

por

Agregar un comentario

This seemed to help a LITTLE but I noticed corrosion inside my machine (2 yrs old and I use it to make 2 to 4 cups a day). I just don't think these things are made to last. After all ....we live in a monetary system of cyclical consumption & planned obsolescence. Time to donate to the cause and get a new one, lol.

Fue útil esta respuesta?

Calificación 0

Comentarios:

Agreed. Same problem here. Used it a few times a week, two years in, it starts doing this crap. If I have to disassemble the beast and clean it, they should sell the parts, tools and information to do that. Screw Keurig, I'm going back to a $20 Mr. Coffee.

por

Agregar un comentario

Añadir tu respuesta

Philipp2 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 117

Últimos 7 Días: 719

Últimos 30 Días: 3,672

Todo El Tiempo: 101,942