Solución de problemas Super Nintendo

I got a snes it turns on you see game starting up then fades out black no picture but there sound

Hi my controller is playing back to front

when playing super mario kart, super soccer or super tennis, the grass or ground is all blurry, the lines do not show anymore, it’s all blurry.. any ideas? is the a bad cartridge? or my snes has some problem?

No power …swich good power port good fuse good ??

When ever I turn on my Super Nintendo the Super Nintendo game looks black and white.but why

I got my old super Nintendo out for my younger kids to play and all my old games start but none of the Characters come up on the screen. Like I can see all the background to super Mario

world but there's no Mario or Koopa's running around. On Donkey Kong he doesn't pop up, and also none of the characters pop up on the introduction to Spider-Man Maximum Carnage. There's a few blocks in the left hand corner at the top of the screen but I have no idea why I can read the game and see a background but there's just no characters. Does anyone know what's going on? I'm completely at a loss.

Sincerely,

Not tech-savvy at all

It works fine just the controller won't do anything, everything else works

mine works just fine on super mario world but on every other game it will turn completely black after a while on zelda I can use the main menu but once I try to start it stops working

tengo un super nintendo molelo SNS-001

Nnesesito licencia o que onda no puedo iniciarlo

Hello I have a1992 SNES everything works but the player 1 controller responds incorrectly. My controllers works great I tested both in my SNES Jr. When I plug the player 1 controller the buttons do wrong things like left arrow button do what START button do or Y button what A button do. In the player 2 side works fine with both controls. Whatcan i do to repair it? Also the ribbon that connect the controllers board with the moderboard it’s fine.

Power light turns on but tv reacts as if it’s not receiving signal. Tried 2 different TVs and 2 different console to tv cables. Screen doesn’t even “black out”. It’s as if nothing is trying to happen.

I just turned on my childhood SNES. It’s been acting up lately but today in the middle of playing super mario all stars the screen just slowly faded to black and then the console basically started rebooting by itself. I took the game out and tried another game. It wouldn’t boot. It turns on but no signal to the TV. I use an HDMI converter. I tried mario kart next and it booted normally. Then I tried mortal kombat and now it doesn’t work at all. I’m also using a universal AC/DC power supply. Could anything I’ve written be an issue?

I have a game genie that loops over and over after about 7 seconds… can't find anything on google about this issue. I have a working game genie to compare against so it isn't my system. Any ideas?

I have a Switch that after changing the front trim now does not output to the LCD screen, the digitzer works as you can hear the sounds made by the menu when swiping.

I've tried a new LCD, same issue.

The strange part seems to be that it still outputs to the TV. (And works perfectly)

I've tried to find some solution to this but can find no other references to this problem.

Any advice would be greatly appreciated.

so i had a yoshis island and when i turn it on it will go normal with intro but then it starts back to beggining in the middle of it in a loop is there any way to fix

I have a snes that goes to a black screen. The power comes on and the screen goes black. I have tried different cartridges and same result. Cables are good system has been cleaned as well as cartridges. Need help.

The red light won’t frickin turn on help me pls

I am having similar issue with Zelda (Link to Past) - I have two game cartridges that both freeze about 5 seconds in to loading (when triforce triangles are moving to center of screen. Both games freeze at exact same place. All my other games load and play just fine. Can anyone help?

So not too sure who can help me, I have two SNES consoles, both work, power on, load games. On BOTH, none of my 3 controllers work. I find it hard to think all three controllers are bad, and I find it hard to think both consoles controller ports are bad. I read something that maybe the power supply may be the culprit.. Any one know what else I should rule out before I attempt to buy new controllers?