Resolución de problemas de SodaStream Source Troubleshooting

We purchased two gas bottles 5 days ago with 60 L gas cylinders, the screen says we are out of gas, replaced it with a new gas bottle and it is saying the same thing! Any ideas?

Installed everything according to directions. but no carbonation taking place. Waste of money in my view. Unit is going back to Costco, I won’t bother getting another one.

Installed cylinder and placed bottles as per simple directions - nothing happened, no carbonation. I don’t feel like messing around with a pressurized gas cylinder to see if there are extra seals as suggested; this thing is a waste of money in my view - it’s going back to Costco and I won’t be getting another one.

Carbonation nozzles not producing anything, however I do hear and feel the co tank kicking out product. How can I get the nozzle to work again? Hope I done have to purchase another one so soon since this was just bought in summer 2014 from Office Depot

I bought a refill at target and it lasted about a week and never seemed to have much fizz?

Crappy refill had nothing in it!

if your ss in not working you really need to tighten the gas bottle… i mean seriously tight …thats all

its not the refill its the above……… tighten tighten tighten…..

Bought a brand new power - followed the instructions, the lights on unti seem to be working however there’s no carbonation at all . I’ve screwed and unscrewed then rescrewed and tighten the gas bottle without any luck . It’s going back to the store pretty pathetic really

I can’t screw in the refill canister. Am I missing something? I don’t know what to do. Any tips?

Nothing happens when I try to twist the bottle in place, it does not stick. As a result, I never get the response sound (1 for mild 3 for strong fizz-sound). Help!

The carbonating tube in my machine barely touches the water. Just the silver tip is submerged. Is that causing the no-fizz issue? How do I did it?

Do Soda streams stop working after a few years? I fizzy the same amount of water a month but one canister only last half the amount of time

My sodastream is 10 years old and it fizzes too much when I unscrew the bottle from the machine. Is it worn out or is there something else?

No CO2 comes out. New cartridge, buttons work, sounds like it’s working… just no gas comes out.

I attached the bottle, after dispensing the CCO2 I cann’t get the bottle out.

I can not get the bottle out of the sodastream.

when I pull out my finished bottle of water. a brown liquid is leaking out of the soda stream? ?Not sure if the carbonated water is safe to drink. I have only used plain water with this soda stream??

aaargrgrghhhh

i hate sodastream

angry as &&^&

turns out, the white immersive carbonating nozzle was loose. give it a good twist clockwise, and see if that works.

i bought a soda stream that has a refillable gas bottle. It worked great three times and then stopped working. I think that gas ran out.. the bottle said it has 80 fills or something.. not very happy. if i get a new bottle the same thing will prob happen

“Start with carbonated water”?!!! Then just why did I bother buying a SodaStream in the first place?

What an absurd suggestion.

Have no power model, just push button to fizz. Bottle leaks out of top like its lost its seal. Can't screw in any tighter?

We have been having taste problems! It used to be that as a cartridge was almost out that the water started to taste sort of sour or “off”. We cleaned all bottles, checked their expiration dates and added a new cartridge and the floor is still “off”. We have used this for years and not had this problem! Now we have 4 rather expensive cartridges we purchased and cannot use the Soda Stream. Help!

I have been having an issue where I press the button for CO2 and the bottle shoots off the bottom and water sprays everywhere. I didn't hold the button long either. It happens every so often, which makes the machine unreliable and a little frightening, tbh. Anyone else experiencing this?

My soda stream works only if I drink the soda right away. The fizz dissipates very quickly.

If I put the soda stream bottle in the fridge after an hour it is flat. Yes I am starting with cold water and if I make and drink a glass right away its fine.

I also have tried making soda and putting it into used (clean) bottles - its fizzy when it goes in and flat when it comes out.

So far I am very disappointed in my Soda Stream.

It makes thev nk noise but does not push the carbonation into the water like normal!

My soda stream worked fine when I got it for Christmas. Went away for three weeks, first bottle was fine. Ever since the water explodes and half of it goes on the floor. Any suggestion?

The bottle attaches firmly, but when carbonating, water leaks and the finished product is not carbonated.

Help, my soda water is flat. I thought it waas the canister so I changed it out but it’s still not working. I can’t return cuz it was a Christmas gift.

Help when I push downwards for 3 lights water gushed out and water is not air rated!!!! Does anyone know what the problem is.

Help! The plastik nozzle broke off the carbonator after it getting jammed on the side of the bottle when I closed it - is there any chance of repair or buying just this one piece rather than having to buy a new machine? We use it day and night!

my soda stream doesnt lift up on its own. like i have to hold the lid up to put the bottle inside and it just falls and smashes itself close…

I have just replaced my cylinder for the play source soda but it is not carbonation very well as its seems like its empty it's a full cylinder.

Fleur (Adelaide SA)

Can’t seem to find a resolution in the thread so posting again. Replaced my co cartridge and have made about a dozen bottles no issue. Now, the lights flash but no bubbles and no air. Can anyone suggest why this might be.?

When I removed the bottle after carbonating a red tiny piece came out and now the soda stream won’t work properly. Where does this little red tab go and how do I fix it?!

Had a sofa stream for 3 yrs and still works fine and has never had a problem. Even fizzed some flat sparkling Shiraz leaving bottle in for 10 mins before release. No problem. Then bought a brand new one and water floods out of the top of the bottle if you fizz for more than a second. Then I noticed a new sticker label placed on the top of new one that wasn’t there on the old one telling you not to hold the handle down for more than 1 second. If you want fizzier water, then hold it down up to 6 times at 1 second each. What a joke and cop out! You can do this, but you will never see the second or third light illuminate. So why have the three lights? Sodastreams product has just got completely useless and to compensate they have stuck a label on the top telling you to fizz up to six seperate times or else “ long presses may cause the bottle to overflow!” The bottle never overflowed on the old one. My daughter took 3 back in a row to David Jones because water spewed out of the top when carbonating.

my unit seems to have broken down…. There is a very narrow tube running from the cylinder area to the front of the unit where it must tie in to the bottle connection. Maybe it broke but I see nothing about this particular malfunction.

I was told that Sodastream couldn’t do anything as I didn’t have a receipt and it was a gift so get the purchaser to deal with it. Infact after tweeting them they were excellent and asked for photographic evidence of the manufacturers code inside the back cover. This showed the machine was within the 2 year period and they sent me a returns label then sent me a brand new model! They are very helpful so I don’t think it is a rarity that these machines malfunction!

How do you fix the white tube (if it’s loose)? Thanks

Hello! Since I changed my canister, when I press the button, way too much gas comes out. I know this because the first time, when I unscrewed from the top, my whole kitchen basically shook. When pressing the button with no bottle, it is much stronger relative to how it was previous. We tried taking it off and putting it back on.. any other suggestions?

I have successfully used my soda stream for over a year and recently changed the cartridge. It worked for a while, but now the bottle does not seem to lock in place and there is no fizz in the bottle

After usual gassing procedure the water is not gassy. Although i can see it has functioned properly, maybe three slightly shorter bursts than before. The bottle is same weight as a new gas bottle and same sound when shaken, i fitted the new bottle, but the same thing happened . What can i do

All the lights flashing have you found a solution?

Mo solution found or offered

On machine for 4 hours now bottle is shaking don’t know what to do advice please!!!!

So the suggestion for not enough fizz is to use carbonated water???????? SERIOUSLY????? Why not just use carbonated water and skip the $150 middleman named Sodastream? FFS

&&^& sodastream!

Hi

I bought a Sodastream Power machine 3 weeks ago. I like it a lot, however I have a problem with it. After making about 5 bottles of carbonated water, the gas cylinder becomes loose (it unscrews itself). When that happens, the carbonation will not be as strong as normal.

I have written to Sodastream, but they are unaware of the problem.

Has anyone else had this problem?

I’ve had my “Source” model about 6 months. It just STOPPED working. When I depress the head, there is no resistance. No sound. Though the lights come on.

My canister broke while using it. Two bursts and then one continuous burst. It’s now sitting on my counter releasing gas from the opening. Not sure what else to do but separate it from the housing.

One of my bottles will not open. I have placed lid under hot water to expand the plastic but this did not work. Any suggestions?

Gas was leaking after installing a new canister and the first use of the new canister. Took it out, screwed back in, still leaked when I tried to charge a water bottle. Took canister out and checked the washer. It was out of line, probably when the old used canister was pulled. Took washer out, saw some wear but without a replacement I decided to just reverse the washer (in other words, the wear was now on the machine side), screwed the canister back in and good-to-go!

Have an electric I push button and just does not seem air coming out brings about enough fizz continually pressing the button is there anything inside that can cause this-happened with a new canister

My soda stream is a month old…I took a while to learn how to perfect it…you hear a hissing noise then a plunk then it's done…wait till the bubbles stop then do it again… now tho the bubbles go in and no fizz… whats wrong??? Please help

The part you push doesn't move, bottles are in correctly

There is no seal between the bottle and the sodastream nozzle any more. Please help!

Co2 cartridge wont screw in. If if needs a new washer, where do i get one?

I have an issue with my electric machine it seemed that the co2 cannister was faulty so I weighed it and 1100gms it is usually around 700 gms when empty, I do not buy cannisters anymore as I refill my own and have for the past 3 years. So made sure the cannister was secured tightly and switched it off for a while and now works fine. Refill your own cannisters and you will save £££s.

My sodastream only fizzes once, no matter which carbonation button you press.

Does anyone know what size washer to use at the CO2 canister connection?

John Johnson

I’m confused by the washer where pinching out one of the washers and if there’s a second one there(?) leave it and save the other one just pulled out for future. What if there isn’t an extra washer there, then what put the one you just pulled out from-back? My canister is always needing tightening to every time I use the sodastream or else it’s low bubbly and looks like there’s nothing in the canister left, but there is, it’s just always untightening and i’ve had it for about a year and use it frequently. That’s other thing, where to get replacement washers and if the hose on the front of it’s loose where you put in the bottle or on the bottle, where’s that going to come from as there’s not much on their own (manufacturer’s) site to offer up the info.

Where can I find a repair company on the Gold Coast

If I press the start button and leave it for a fraction too long, the liquid bursts out when I try to remove the bottle. What is the more-or-less maximum time to allow to get the most ‘lasting’ bubbles, assuming the water is out of a fridge compartment first, before inserting the bottle?

Can I subsequently try to put a SECOND dose of gas in, immediately after removing the bottle? If so, for how long (after allowing the gas bubbles to settle briefly before any further attempt).?

what battery???>?

Hi there.

I have an older model possibly, with glass bottles which go into a cylindrical bottle holder which pivots at the base. when i try to carbonate, i hear gas escaping from the bottle holder and water overflows the glass bottle into the bottle holder and doesn’t really carbonate the water.

Not sealing somewhere presumably but everything looks sound.

Can you tell me what may be the problem?

cheers,

Stu

I just added a new cartridge and this one is doing the same as the one I replaced. Water sputters out and CO2 was NOT added to the water. I thought the last cartridge was empty but now I’m not so sure as the new cartridge is doing the same thing. Any thoughts on how to remedy this? My machine is relatively new - about 6 months old. I appreciate any help cuz I am missing my fizzy water!!

Trying my Fizzi for the first time, this thing is garbage. I get more bubbles when I fart in the tub. I know what carbonated water should look like, I drink club soda all the time. This thing is definitely going back to the store.

Soda stream has been in basement a couple of months. Put in new tank but does not carbonate any idea what I can do

When i attach my bottle properly and push down button no gas comes out. What can i do.

Soda stream bottle won’t come off

I can’t screw the bottle in- is a piece missing?

I have just bought a second replacement for my original and excellent Source thinking the first one was faulty. But both the replacements spray water everywhere. Are the new models just inferior? Or is there a solution

My soda stream sounds like it is leaking carbonation everything is screwed in a tight no sure what is going wrong. It worked fine this morning now it’s not. I believe it is an older model and it has a new CO2 tank. Any ideas?

Just received one 2 weeks ago. I tried using it for first time. I followed all the instructions but machine doesn’t work at all. There are no lights indicating its even on

Help! When I screw in a new CO2 Canister it immediately starts shooting/leaking out CO2 like air from an air compressor. What is wrong with it? What do I do?

I just got my one touch.

The blue lights don’t come on.

The cylinder is screwed on tight.

Water bottle put in as directed.

Nothing is happening

Any suggestions? Should I just return?

I’ve tried pushing up the bottle before starting but every time it overflows. I don’t overfill the bottle either. What am I doing wrong?

How do I safely remove the carbonated water bottle once it have been carbonated? I worry that yanking it very hard will break something.

So I have a "kit" that is supposed to help refill my sodastream canister. I have bought a new (and full) 10lb CO2 refill tank. My sodastream canister isn't taking a charge no matter what I do. Froze the 1lb for 6 hour. No go. Tried freezer overnight. No go. Turned my 10lb upside down when trying to refill. No go. Checked washers to make sure they allowed the needed to be pressed down far enough. Seems fine. I'm at a loss for how to fill this dang thing.

Funny noises when I press the button to fizz no5 like regular then no bubbles

Hi. I put on a fresh canister, and the Soda Stream is only trickling gas, as if at the end of a canister’s charge. I put on another fresh canister, and the same thing happened.

I get compressed air, but no CO2…… flat water. I thought it was the co2 tank, but this is the second time in less than 2 weeks.

Aquafizz will not unlock to release the bottle

Anyone know the exact size of the washer-ring that seals the Co2 cannister in the back of the Source model?

I am finding that when I carbonate a bottle of chilled water from the fridge, water escapes all the time whilst carbonating, and it takes endless pressing the button to finally get a fizz. Not too impressed so far !

I haven't used my machine in mos, made a bottle last night to drink this morning and it tastes like chemicals or something not drinkable. I only used water and strawberries. Has the gas gone bad?

I just changed the canister and now get very loud gas leakage when I press down. The white gas hose is not loose but none of the gas seems to be going through it. All of the gas is leaking around the top of the bottle. Resulting in no fizz and a very loud sound. Help please.

Tried 2 new bottles but fizz poor and little white pearls of ice appearing??

Bottle wonk lock into place. Have reviewed instructions and tried a secondary bottle, but they won’t lock in.

Just got brand new Sodastream Fizzi and new Cannister. Seems to work, except that each time I push the button to release CO2, in addition to the hiss that you see in the video, I also get a noise that sounds like loud farting. Could this be a leaking hose? It only happens while I press the button. Thanks for any advice.

This is my 3rd sodastream because of pressure value hinge breaks. Weak link in design

My SodaStream Fizzi One Touch is making a horrible screaming sound like a classic horror movie whenever I carbonate beverages. I'm embarrassed to use it because it sounds like someone's getting badly hurt in my kitchen! I've tried tightening the carbonation tube and since it's in the front I know it isn't anything to do with the canister. The gas seems to be escaping just fine because it's still hissing….unless that awful howling means it's having trouble venting? I don't know, but does anyone else have any idea what I'm taking about or how to fix it? My neighbors and my sanity would greatly appreciate it, before someone calls 911 and I have to try and explain this…

Thanks in advance,

Dean

Soda stream is not putting enough CO2. Comes through like a trickle. Ideas? I don’t hear gas escaping.

I changed the CO2 bottle. The lights are on, the bottle is in right position. But when I click nothing happen.

My I ❤️ My SodaStream bottle will not go into the unit when screwed in. It is too long and hits the base.

Pour ma part je n'ai qu'un petit jet et quand j'arrête d’appuyé sa continue encore quelques secondes.

Je pense à imble avi que le probleme vient de leur cartouches rechargeables.

Quand j'ai ouvert le capuchon, tout de suite jai remarqué que la petite valve en haut de la recharge avait un peu de jeu,alors que sur celle que l'on obtient avec la sodastream la petite valve était un peu plus haute,et surtout n'avais pas de jeu.

Ps:attention je n'ai jamais dit quel fuyait

Mais je trouve sa un peu bizarre

Cler

Christophe

Je pense que la valve de leur bouteille vieillit mal a force de recharger.

Des que jai ouvert le bouchon blanc j'ai vu que se n'étais pas comme d'habitude.

Il me paraissait user enfoncé et avec un peu de jeu sur les côtés.

Rien à voir avec les bouteilles fourni avec l'appareil

Qui elle son bien haute et sans jeu de gauche à droite

Voila se que je pense!

Ma soda stream play acheté il y a 6 mois fonctionnai bien jusqu'à aujourd'hui… EnEn effet après fixation de la boîte, quand j appuie dessus elle reste bloquée en bas et pas de gazeification… QueQuel est le soucis.. Merci

demain j'irai échanger ma bouteille et on verra bien…

Our unit continues to emit gas after filling

In what way do other liquids, besides water, damage the soda stream?

My soda stream will not make the sound letting me know it is pressurizing

On ne peut pas visser la bonbonne de gaz. Lorsque que l'on arrive presque au bout du vissage, le gaz s'échappe.

Utilisée 1 mois, déjà HS :(

Le gaz rentre dans la bouteilles, mais pas de “pshit” en libérant le contenant et eau plate :-(

Merci Sodastream ! Voyons la concurrence …

Once the unit is used, it continues to leak gas from the fill nozzle after use. The only way to stop the leakage is to disconnect the gas bottle. To be clear it is not leaking from the bottle the valve on the nozzle seems to be the issue. I am handy, what is the fix?

All lights flashing but won’t work

Lors da la première utilisation (sprit), le gaz ne cesse de d'évacuer par la buse avant même sans bouteille.

..comment faire?

the sodastream isn’t gripping the bottle, and when I try to hold it there water goes everywhere!

When I push the button down nothing happens

On my very first use of my soda stream it starts carbonating and doesn’t stop. I have checked the co2 container, the bottle the nozzle. It kept going for almost 11 minutes before I had to take the co2 bottle out

this product is trash, how is it broken before it’s first use? When pressed down the leaver starts the process but doesn’t stop, in video of other use a click can be heard when the leaver returns to the top of machine

My soda stream keeps leaking co after the light shuts off, is there a fux for that?

When I push the button to carbonate the water is stays down. Button stuck How to unstick???

Bought a new canister and I own the source model and once I push down to make a bottle the Co2 won’t stop coming out even I release the button I have to unscrew canister before it stops pumping Co2 in to bottle now it’s useless to me, seems very dangerous too. Hope soda stream offers a replacement or I’ll never be buying one again as this ones under a year old

Has any one had issues where everything is working does the main part of making bubbles but then it gets small air bubbles not stopping and I have to unplug it to get it to stop.

My soda stream won't release and continues to carbonate.

My issue is a bit different as after I depressed the button or lever on my SodaStream Source , it wouldn't shut off and kept filling the bottle with fizz . I had to unscrew the bottle and damned near froze the tips of my fingers . Anyone heard of this ??

Hi,

My Soadastream has the glass carafe. This premium unit has an issue that I have not got a response to in past queries.

I push the carbonation button, it fills the bottle, but then only partially shuts off. A small but constant stream of CO2 is emitted. This issue can only be solved by A: removing the canister or B: repeatedly pressing the co2 button quickly and repeatedly to jiggle it closed.

Neither solution is acceptable, hence we have not had the use of the unit for months and do not intend to replace this unit.

SODASTREAM - PLEASE ADVISE ON A FIX.

How do you test the gas pressure in the C02 bottles. I have had a Sodastream for 8 years and replaced gas bottles heaps with no issues. Just recently I’ve had to replace thge C02 bottle and there does not appear to be enough gas. Tried two different locations and two different sources. Used Sodastream gas bottle and Sodagas bottle. Same result. Not enough gas comes out. Checked all washes etc and they are OK. Can you take the C02 bottle to be tested somewhere? as I suspect this is the issue… Bad suppliers. JeffW 14/2/2021

I try to twist the CO2 cylinder in but it never catches to tighten

This is no good. A nice simple Genesis model bought for Christmas 2020 has got through two cylinders in two months (making not many bottles per cylinder). It has always leaked a little but now each time we use it an ever increasing amount of water runs out from somewhere in the top. I’m reluctant to unscrew all the little screws holding the top together. I’ve checked all three of the Leaking During Carbonation troubleshooting and both the obvious points of leakage are tight (cylinder and bottle). So we’ve given up using it. Graham

I just got a new canister for my soda bit is already out or not working. Do I twist the nob on the side of the canister to fix it.

My bottles are leaking fast. I checked and the little button at that pushes directly into the canister to release the gas does not bounce back when main button is let go of. Is this fixable? (older model)

Where can I get the black rubber band where the bottle mouth attached, my rubber is broken and water is leaking

How do I remove the metal bottle holder for cleaning??

How do I remove the metal bottle carrier for cleaning

Cuando estoy metiendole gas al agua, se escucha como se escapa el gas y no se siente como la botella tira para abajo por la presión, ya intente todo lo que dice arriba pero nada funciona, creo q el cierre hermético se a fallado, ¿me pueden decir como solucionarlo? Gracias

old cannister with some co2 responds to the button being pushed down to release carbonation. The new cannister does not respond when it is pushed down and nothing happens.

The bottle will not lock into the snap lock position

I have an old model and it works pretty good. Figured the new model would work even better. Nope. Sometimes it fizzes and sometimes it gets weak. I’ve opened and closed and tightened everything. I expect it to work and not be a dud from the start. I regret buying this. I wouldn’t even give it away. It’s going into the garbage. Waste of money.

I use my Sodastream Source 3 times a day. Have been doing so for 8 months now.

Just today it started leaking while carbonating the water. I am inserting it the same way I have till now.

I insert it with the white gas tube going down the middle of the bottle and push it all the way up so the opening of the bottle is flush with the bottom of the sodastream. Then I push the bottle down so it’s standing up straight.

I’m positive I’m doing nothing wrong, but the machine started acting up today. Can I do anything about it?

It has leaked once or twice here and there in the past, like 1 in 100 bottles, but now it’s every time, more and at a lower pressure.

How do I fix the co2 from coming out to hard and only in short bursts? It isn't coming out like shown in many videos and can't seem to find the answer anywhere for this problem. When I push down for the carbonated water it is hard and pushes water out even at the full line

This thing is a piece of crap i’ve done everything correctly and it still doesn't work. It’s going back to the store. I’m really disappointed.

One thing I’ve realized is how is how important it is not to stress the excess pressure valve.

When you press down you can hear it ramp up the pressure. The valve kicks in when the pressure gets too high and you’ll hear air being released.

When that happens you should release the button and wait a second, then press down again.

If you don’t do this the valve will get worn down fast and start to leak, mine did. Whenever pressure got too high after that water flowed back into the machine and both water and co2 was expelled from the machine where the valve is.

I got the whole machine exchanged for free.

Can you help? When I push down for carbonation, there is no sound and no gas, but the lights will eventually light up. Any ideas what to do please?

Bought a manual sodastream in October - no longer carbonates water. Unable to fix, really disappointed. Won't buy again

In initial installation there is constant gas leak through the carbonating stem. Unit has never been used.

I had the problem, reported by many, of CO2 not shutting off when I release the button. I’ve fixed it, at least for now, by backing off the CO2 cartridge about 1/16 turn from tight

Hi, I have a little white plastic washer that keeps dropping out, it has a little ‘v’ cut out at the perimeter. I have no idea whether or not it goes beneath the black rubber washer or sits above it or shoudnt’t be there? Any useful advice would be appreciated. Thanks

The carbonation works fine but dissipates quickly. Within 36 hours, it's flat. How do I correct this?

I have reviewed all of the trouble shooting suggestions to no avail. I am on my third CO2 cylinder. When new the new CO2 cylinder gave my 34 1 liter of carbonated water. The next two bottles of water were only mildly carbonated though there was good pressure and good flow, normal amount of gas into the 1 liter sodastream bottle, but after leleasing the bottle from the machine the water was flat. I tried this several times and got the same result. It seemed the CO2 gas was used up and what remained was compressed air. Installing a new CO2 cylinder fixed the problem, temporarily, but again after about 30 1-liter bottles with good carbonation again there was good pressure and flow but carbonation stopped. I use filtered water and store it in the sodastream bottles in the fridge. So the water is good, and cold. What do you suggest is the problem? Alberta , Canada

My Soda Stream releases gas very slowly and with little pressure to carbonate the fluid to the point I thought the tank was empty. After purchasing a new tank for $30 I discovered the replacement full tank did not fix the flow rate. So it appears I tossed a tank that wasn’t empty. Please help I prefer not to buy another plastic soda stream mechanism at $125 after just 9 months. Help !!!!

Just bought a new cartridge and when I pushed down to carbonate the water, I heard a loud POP. Now nothing happens when I push down on the injector. Pulled off the cover to expose the cartridge and there's a piece loose in the hardware at the top of the canister. Can this be fixed?

the bottle is inserted properly, press Button to activate Carbonation. Hear motor running, but the nozzle does not rotate, move.

After 3 months the seal won’t hold. Tried getting of the company after viewing their videos as recommended. Held for an hour WTH no response. The company can’t support its product and I won’t be back. Don’t buy this machine.

Cuando aprieto el botón para gasificar el agua, se chorrea y revalsa el agua de la botella

You say see guide where is it . No lights on power Sodastream no batteries , helpGraham0418221765

Lights are on, water bottle is in place, cartridge has CO2 but nothing happens when I push the buttons.

I have an older model and it doesn’t seem fizzy enough. Is the long white tube inside supposed to be below the water line inside bottle or above it?

Dont know, try Servo.

https://www.mikrocontroller.net/topic/47...

When I press down to carbonate makes a loud noise

& gas comes out the top

donne l'impression qu'il n'y a plus de gaz dans la recharge, et à donc du mal à charger

Where do we get the washers?

Where do we get the washer to install in the top of the soda stream so the cartridges don’t like when changing the bottle

We purchased our “penguin “

Model in 2013 . It has worked fine until recently it makes hissing noise but does not pressurize at all. Tried using two new cartridges to no avail. Suggestions?

Help when we use the machine product tastes like diet soda?

What can I do I do not want a diet soda taste

Bonjour mon soda stream semble boucher, très peu, de gaz sort. Et quand j’arrête d’appuyer, le gaz continu de sortir pendant au moins 10 sec…

Une idée du problème?