Resolución de problemas de Magic Bullet NutriBullet

I am also having this problem, but nothing obviously blocking it...?

I am also having this issue. The cups seems to be down all the way and it turns on but the base grinds down the rubber tips on the bottom of the blade base. I'm on my second one and it's doing it again! So annoying. Need to find a blender that works

I am unable to screw cup off base of nutribullet. What do I do?

I had this same problem. They helped me reset my little white strips on the inside of the unit. Fixed it right away. Call customer service they will help you and it's a fast phone call.

does water leeking from the cup not tightened properley damage the motor

Personally my ninja was a gift and the very bottom leaks all over. I'd never buy one of these for anyone ever!

Ninja was given to me as a gift. I thought I'd be impressed but I'd never buy anyone this thing ever! I'm afraid to use it. I'd love to send it back!!

if the cup doesn't fit down into the base correctly just short of reaching the tabs you're ream lid may have fell down into the base you can ease it out with a fork

I am the same, poor set up, when I make a smoothie the base unwinds and smoothie goes everywhere

The base needs to lock into place then there wouldnt be a problem, I may look into slotting the base and gluing a block for it to slot into,

If the base doesnt go down , I found the motor and the tabs on the base were hitting, simple fix, just moved the motor around a fraction and down it went.

I am surprised NUTRIBULLET has not made comment as to the comments on here, or made suggestions on fixes. mitchfj12@hotmail.com

does worry me about liquid going down around the motor

other than that yes its a great item

I find it is extremely difficult to even get the blade on the jar - does not align well with threads and always wants to screw on crooked. I have to redo it so many times, I usually just abandon my intent for a healthy smoothie and go for something else. Very disappointed in Ninja, wish I had selected the NutriBullet.

The bullet stopped working while in use

My bullet suddenly stopped working

My nutribullet 1200 series won't turn on. Despite running through these checks. The blue light on/off button keeps flashing.

where am I going to be the magic bullet repair

Or

there a service center here in the philippines?

Mine won't stop hearing things. I've unplugged it I've tried the button a hundred times it won't stop. I've only used it maybe 25 times.

I have the original magic bullet and it still works great. Most of the parts that came with it are still in their plastic. One issue that I have been having is that when I put the blender (anything that has a blade) on the unit I have to hold down the blender and when I first got the unit I could just turn to the right when blending and it would stay running until I turned to the left to remove the blender. Any suggestions how to fix this.

Thanks

the bit just inside the unit that connects to the cup when you screw it down and start it has disappeared !! its just a naked screen thats left , what could have happened?

I don't use the bullet often but I have notice that the motor seems to not engage with the rotating device that spins the blades. This results in a very noise machine, smoke/sparks and black soot from the vent.

Does anyone else experience this or is this how the bullet rolls.

The blender works but after 15 seconds it starts to be loud and burn. Anything I can do and is that dangerous ?

Help! I know the answer is too easy, but my nutribullet is ready to go but it simply won't start. I have checked everything I can think of and have been unable to get it to start. Any good ideas?

Candace

Having a hard time atching and activating the blender it doesn't match up with the base

I buy my nutibullet at 9/15 17… just use it a couple of times… and now it does not work anymore… what do I do now.?

I buy my nutri nullet at 9/15/17,and just use it a couple of times what do I do now.?

My Nutribullet will not power on. I checked the outlet, the cord and the tabs. Nothing wrong there. What else should I check??

Hi,

My new Nutribullet RX won’t stop unless I switch off the power button.

I tried making soup but it leaked through the base so I cleaned the base and let it dry out.

I tried making soup again and it just kept spinning at full speed and wouldn’t stop - it nearly boiled over. I let it cool down and tried making a smoothie - same thing - it kept spinning at full speed, the green light went off but is just kept spinning.

When I put the jug on it starts spinning immediately at full speed, no delay.

It worked find the first 4 or 5 times.

Thanks

Joanne

My cup would not push down enough to turn to lock in place. Called nutribullet. Told to take tooth brush to top white 3 places where it locks and scrub. Took a couple of tries and now works again. Hope his helps.

I just purchase my nutri bullets 600 series but it doesn't work. Is there any service center in the Philippines.. I bought it in united Arabs of Emirates. Last August 06,2018.. Email liza 0038@gmail.com.

Need advice as to why the cup pops off during blending from the activators after 5 secs which means we need to hold in place to complete the process.

Activators all working well so unsure of the cause??

I found out today if whats in the cup isn’t heavy enough it will not blend either so try adding a little of your treat into the cup and try again. I also reset my white tabs inside the unit.

Hi my nutribullet has cross thread and now and I can’t detach it

Wow i was gonna buy one, guess i not now. Looked up for a friends that stopped working

We have used our nutribullet just now and it leaked when attached to the base and switched on so we removed it from the base and gave it a wipe down but when we tried removing the lid from the cup it wouldn't come unloose and still hasn't, it has been passed around through four sets of hands and none of us are able to open it, who else has had this issue and what do you do?

My 9000 didn’t like ice in my smoothy. Turned off and is now dead. Brand new. My old one lasted 5 years. So annoyed.

I have same problem today. Any solutions ?

My nutribullet is not turning on at all, it is pretty new. But as the others mentioned the leaking probably got into the motor. I have opened it and I am allowing it drain the liquid to see if that will fix the issue

My Nutribullet stopped working out of nowhere! How do I fix it? Or can I even fix it?

My nutribullet leaks black ink like liquid from the main component each time it is used and the noise is now louder than normal - don't want to use it as expect it to explode (that loud!) - why is there black liquid from the machine? Have taken photos to show to help but cant upload here.

My magic bullet is stuck spinning unless I unplug it! What do I do?

el botón parpadea dañen azul y no funciona

Hello friends, the blue button started to flash and does not work

I leave my blender plugged in all the time. When I go to use it, it won’t true non and I have to unplug it and plug it back in before it will work. Why does this do this?

How many years does a Nutribullet RX supposedly last . mine is 6 yrs. Old and spins for 2 seconds thats it . Anybody else have this problem

My NutriBullet would not start. I used the troubleshooting guide and all the explanations were useless. I took a really good look at the machine and the problem was that one of the buttons along the rim that the cup tabs are supposed depress was stuck. I gently moistened the tab with water and carefully ran a thin knife along the edges, then sprayed a little WD-40 on it. I pressed the button again and it started to give. Eventually with a few more presses it came free and the button started working normally. My NutriBullet works fine now :-)

My Nutribullet Balance when plugged in the light blinks and goes out. No power after. Anyone has a fix

After I turn my Nutribullet off sometimes is keeps running, and unplugging it while it’s still on could be dangerous any ideas on how to fix this?

My cup won't go down to begin working my 3 prongs are fine cup just won't go down

I can’t get the cup to connect to the power base. I have tried halving the quantity of ingredients but it will not push down so as to engaged the cogs to the power base

My nutribullet will not start, its plugged into to working outlet; The only thing I noticed is the clear circular disk with pie shaped slices in base is cracked-not sure if this would be the issue?

I bought my nutribullet a few months ago. I used it for the first time today. It worked for less than 30 seconds then stopped. I haven't been able to get it started since.

Nutri bullet serial number: 232I01031902310 purchased 6 months ago,not turning on, in spite good power cord etc.

For our NutriBullet, it does engage and work, however I need to keep constant downward pressure on the cup to keep it going. Otherwise it stops. Anyone have any ideas? Thanks!

My Nutribullet Pro worked fine last night and today nothing happens when I attach the cup. It doesn’t do anything at all - no noise, no hum, nothing. The cord is in good shape, there is power to the outlet, the cup has all its tabs, the cup sets properly into the base, it’s clean and there are no leaks. The cup locks properly into the power base. It’s only 3 months old.

Whenever I blend something that looks like motor oil or some sort of thick and dark lubricant is apparent on the metal ring around the rubber part on the backside of the blades. I think this is because something is missing or a nut or bolt is loose and it sprays the stuff around then it spins. Does anyone know a fix to this?

My blender is spewing contents out of the base , out of the cup I have bought new seals but this didn’t fix the problem

This the second email with no advice

slicer blade is stuck and cannot be removed. please advise.

This is such a poorly engineered piece of junk, in my view. I don’t understand how these folks stay in business!!!

My nutri bullet won’t stay attached it starts to blend then makes a noise then the machine spits the whole cup out it has all its tabs and it’s had a good clean??

If the motors of the nutribullet is worn out because of the prolongation of use, will it still work after few hours of letting it cool? Thank you for answering my query.

I am getting error message on app , nutrilite sensor not stable .Any advice ?

Mine doesn’t turn on, no blue light.  Yesterday, it leaked very little, I dry everything that I could see, today it doesn’t turn on.  Help please :)

Hi. Just blended my protein shake, but cup won’t depress, turn and detach.

My nutribullet only works on the impulsion pulse bottom and not on low or high!

The cup became loose while blending, now it won’t turn on at all.

Hi, i need some help. PLugged food in the cub with blade base on, push down and turn to get the blender going, and the motor starts sounding like it’s going into overdrive, like there is no resistance, and a burning smell occurs. I tried ice after to see what the blade itself was doing when turned om, and the blade spins sporadically, with the motor again whirring at a million miles an hour, with a very distinctive sound? What can I do to fix this? Any help much appreciated

My RX ,it was coming smog out of it during blending and I'm afraid to use it again. I just pull the cord to disconnect. Please!! Can I buy only the motor??? And where??

Mrs. Estrada

The rubber seal seal keeps coming off….hard to stretch to put back on….but it should stay on

After using the machine, I can’t get the cup out of the base. It won’t budge

I have only used my Nutribullet six times and every time I use it the rubber seal falls out and is very hard to get back in.

Nutribullet cup and blade stuck in the blend position. Will not come off of base.

Hello. My nutribullet will not work. The power cord is intact, the fuse is fine, and the activators are also fine (I have taken it apart to check). Any other ideas? One post mentions the heat sensor, how would I check this? Thanks

My NutriBullet won't allow me to unscrew the cup from the blender. How do I get it lose?

My Veggie Bullet was given to me it was working fine but now I'm having trouble with the power botton what can I do & how much would it be to have it serviced I don't have the warranty for it

Hola, una pregunta, mi licuadora es RX y no se activa, prende el foco azul y el rojo de enmedio parpadea, que puedo haces…

Gracias de antemano, saludos.

Hi, i have this nutri bullet in fact I have two and the part that the motor is screwed on to is broken at the two places where the screws are holding down the motor. Can anyone tell me where can I purchase this part from?. Thanks. PS. I have a picture of what it is but I cant upload it here. Please send reply to asurujbally@hotmail.com

HI .I have this nutribullet and its broken where the motor screws on to the housing at both places. can anyone tell me where can I get this part to buy. How can I post a picture of it? I should also mention that I have two nutribullet and the same thing has happened to both of them. thanks. please send reply to asurujbally@hotmail.com.

The base with the cup attached does not drop down to the bottom of the base of the machine. Nothing stuck inside, rotated it several times and several directions, tried the other blade with cup, does the same thing. No drop! HELP!

SOLUTION FOR CUP AND BLADE NOT DROPPING DOWN ON MOTOR BASE!!! I contacted customer service and they had me send a pic of the motor base and there was a threaded ring in the base that was not supposed to be there. He advised to remove with a spoon. it worked with the spoon edge inserted into one of the threads, gently pulling up and turning the spoon around the circumference of the thread and it came up! Yeah! The threaded ring can be attached to the cup, if you want to drink the smoothie directly from the cup.

Blender lid does not seal? Product isnt usable.

Good morning Sirs…the blender doesn't finish the blending cycle…it keeps half powering down and then powering up throughout the blending cycle.

my nutri bullet cup not opening

kirstenpegller  was right. I lifted the lip ring out with a knife and it’s fixed now. Thank you for your help.

Porque mi nutribullet, se enmojese de la base.

mix the black fat from the blades into food

La grasa negra de las cuchillas se menclan con los jugos es peligroso tengan cuidado hay que tener mucha precaución si notan el cambio de color oscuro en tus alimentos, estare esperando una respuesta favorable a mi solicitud

The light blinks on my Nutribullet nb2-s10 and the blender will not activate. Can it be fixed and What can I do to get it working again?

Cup is stuck shut with liquid in it. How to open?

Donde puedo comprar este sello lo nesecito

Se le salió una grasa a la parte externa de las aspas por lavarla de ahí y ahora suena muy fuerte que puedo hacer?

My nutribullet high-torque blade is loosened from the tight base. Now it keeps shredding the plastic area around it. How do I fix that?

I cannot get the blades to rotate by hand - they appear jammed. The unit does not operate despite checking that the 3 actuators are operating normally

I’m with astarrfire, just years later. I’ve purchased this over a year ago, was working fine the first maybe 10 times and then just started doing this. Did anyone figure out if it’s me or the device?

Se encienden todas las luces y se me detuvo, ya no funciona

Hi, my new blade won't turn even though it is securely attached. It won't click to the base. My old blade working out just fine.

I'm using pro 1000w. Please help.

The sides, the three parts on the cup that lock it in to the body are stuck after use. One of them has been almost melted down, pushed so hard in that now I can’t twist the cup, so it opens.

Nutribullet unit nbt-15 is not disconnecting from cup and blade . I’m currently holding unit upside down and unscrewing cup . Unit and blade section won’t disconnect from each other. This has happened twice units is only 3 months old.

The cup doesn't fit properly in the blender, even though it was working perfectly

make sure you put on the lid. the large container will not power on to function without the lid on.

My nutribullet power light will not come on; this unit has been pampered. The cord is good the unit is in perfect condition. Any suggestions?

I can’t remove the cup from the blade unit? Any ideas? It’s stuck and immovable

There is a black soot like substance coming from the bottom of the blender and the motor spins but it does not blend. Can this be fixed?