I cannot see anything on the screen.
The device is powered on but the screen remains blank or the screen turns off during use.
Short Backlight Timer
The backlight might be set to turn off after only a few seconds. The timer may be changed in the Backlight Settings menu.
Low Battery
If the battery is not sufficiently charged, the backlight might not turn on or the device might not power on at all. Try plugging in the AC adapter.
I cannot keep my battery charged.
The battery's charge does not last for more than an hour.
Low Battery Charge
To ensure a fully charged battery, always keep the HP iPAQ Pocket PC connected to the AC adapter when it is not in use.
Backlight Energy Consumption Too High
To reduce the length of time the backlight remains on, reduce the backlight time in the Backlight settings menu.
I cannot connect to a network.
No network connection could be found.
Unconfigured Hardware
To ensure a reliable network connection, be sure the hardware being used with the HP iPAQ Pocket PC is properly configured and operational.
I can't connect my iPAQ Pocket PC to the internet (wireless).
The Internet browser could not be opened because of a connection error.
Router Problems
If attempting to connect to a home network, make sure the router is not encrypted or protected by some sort of password.
Terms of Agreement Not Accepted
If attempting to connect to an internet hotspot, you must agree to the provider's Terms of Use. To do so, turn on your WiFi, open an internet browser, navigate to any webpage and the Terms of Use should appear on the screen.
My iPAQ Pocket PC is not responding.
The screen or one or more applications may be frozen.
Internal RAM Full
The internal RAM might have too much information stored on it and may need to be cleared.
4 comentarios
My IPAQ 2200 does not turn on- When I plug charger in I get a blue and orange light.
carl.schmitt - Contestar
My IPAQ 2200 doesn’t turn on. When charger is plugged in, no lights appear. Battery replaced, but no effect.
John Brooks - Contestar
Good afternoon
my IPAQ 2200 not work , I have tried hard reset to pushing both buttoms but not result
only a logo type appear , i do not know how to fix it may be a battery problem but it works properly
aany solution about it?
JIMMAN - Contestar
I have a IPAQ HP220 it does not work, I have tried one hard reset, pressing down the two buttons and hard reset with the ball-point pen, but only HP'S logo appears and it becomes extinguished at the few seconds and does not reinitiate, i do not know the problem, if it is battery problem or battery death
somebody would know how to tell me any solution to the problem
i shoud to buy a new battery?
JIMMAN - Contestar