Wiki con Contribuciónes de Estudiantes
Esta wiki ha sido creada por un increíble grupo de estudiantes de nuestro programa educativo.
Los crayones no se derriten
"Has hecho todo bien y los crayones aún no se derriten".
El dispositivo no está enchufado
Antes de continuar, verifica si el dispositivo está enchufado. Si es así, continúa abajo.
El dispositivo no está encendido
Verifica si el dispositivo está en la posición "encendido". Si es así, continúa abajo.
La bombilla está quemada
Verifica si la bombilla está quemada. Haga clic aquí para revisar la bombilla y reemplazarla si es necesario.
La tapa no se cierra
"Se cierra la tapa, pero no se bloquea en su lugar mientras los crayones se están derritiendo".
El brazo de plástico blanco dentro de la caja de control está roto o fuera de lugar
Para ver si esta es la causa, haz clic aquí. Si el brazo de plástico blanco funciona correctamente, continúa leyendo a continuación.
El mecanismo de bloqueo deslizante de plástico transparente en la parte inferior de la parte gris del dispositivo (al lado de la ventilación metálica) está fuera de lugar o roto
Para ver si el mecanismo de bloqueo deslizante no funciona correctamente, haz clic aquí.
La bandeja de fusión de metal no se levanta
Verifica el brazo elevador de plástico verde para ver si funciona correctamente. Si funciona correctamente, continúa leyendo.
El brazo elevador de plástico verde está atascado
Haz clic aquí para encontrar información sobre la limpieza y el mantenimiento general de este dispositivo.
Un agradecimiento especial a estos traductores:
100%
¡ Francisco Javier Saiz Esteban nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
14 comentarios
Timer will not count down after 3rd use, meaning lid is also locked.
thorns12 - Contestar
I can't get it to unlock, the yellow button will not pop up!! It won't release the mold :(
kate.weaber - Contestar
I am having the same isuue with my kids set. I can't get the yellow button to release and pop the mold out.
Sonja Chilton -
I am having this exact issue… it's the second use
Ashley Kienapple -
Can't get it to unlock. Light goes out but yellow button doesn't pop up
ktawney - Contestar
Looks like many of us are having trouble with the button not popping up and I’d love a solution. Anyone have a clue what to do?
Barbara Stockton - Contestar
Looks like many of us are having trouble with the button not popping up. Anyone have a solution?
Barbara Stockton - Contestar
What do u do if crayon mold is stuck on the grey tray how do u remove it
The Raging Wolf21 - Contestar
My yellow button won't pop up either grrr
Maranda L gardner - Contestar
My button, yellow, won’t release either. Many same problem but no answer to fix it.
mary - Contestar
Yup, me too. Yellow button stuck.
Helen Bird - Contestar
The yellow button does not pop up for us too… everything works but then the mold is locked inside. I opened it up to unlock it manually and I found out that the base was full of melted crayon drops and they may have caused the mechanism to fail. Even after unlocking I tried to run another cycle and the problem persists.
alicedepalma - Contestar
brand new and lid will not unlock or open?????
celeste - Contestar
I have a unit appears to be new, I bought from goodwill. I bought a new lightbulb and tried it yesterday. It locks down. Timer works. Light does NOT come on. Does NOT heat. I'm wondering if I bought the wrong kind of bulbs. They are LED. Only ones I could find. Any help????
Nancy Guess - Contestar