Saltar al contenido principal
Repara tus cosas
Miembro Desde 13/04/20
Static sound in speakers?
Hello everyone, I replaced a charging port on an i-pad mini 1, I removed the battery and the left speaker but left the...
solder paste in stuck in my stencil
If I hold my reball stencil up to the light it looks like some of the holes are full of solder paste but I can't get it to...
iPhone 7 plus camera getting hot after logic board replacement
I did bend both camera ribbon connectors trying to reconnect them. Finally ended up pinching the little square insulating...
burnt my balls off
Hello engineers I’m a newbie with a simple question for you. I am trying to learn how to micro-solder and was practicing...
audio ic positioning matter?
When removing an audio integrated circut do you need to pay attention how it came out so it can be re-installed the same...
new screen no upper display ribbon
I ordered a new screen replacement for a iphone 7 plus. It doesnt have the upper display ribbon. What am I supposed to do?
Metal re-ball stencil or nonmetal
Which do you like metal re-ball stencils or nonmetal and please explain why
Taping reball stencil or not
I wanted to get some opinions on taping an integrated circuit to a stencil or not. Are most people using tape and if so...
Q-tips or anti-static swabs?
Are Q-tips acceptable in the place of anti-static swabs when doing cleaning while micro-soldering on logic boards
several problems with iPhone 7
Bad WiFi. Home button doesn't work. Input speaker does not work. People can't hear you when you call them. Voice memo does...
Reputación con el tiempo
Análisis de Reputación
El mensaje fue votado positivamente