RadioShack

Another school issued Chromebook looking pretty sad, as this is used like a Frisbee during recess. I need to replace the...

Reflow the BGA. I tried this on a similar model. Put it in the oven for 15 minutes and reflow that main board.

Deoxit those connections and look for broken spring clips on those molex connectors!

If you are feeding these signals into the mic in jack on your computer the “level” is off. Check the following. Turntable will need a preamp unless it has a line level switch. On your computer see if you can toggle the audio input to line level and not mic level.

Are the lines in front of the menu or behind it? One way its the T-con board the other its the display.

My tear was 1/4” in a Boston G1. I used a little “Tear Mender” and made sure I got it in the tear. Used a sharpie to color it.

I didn’t push on the tabs, but put a spudger along the seem and the clips released with minimal force!