Hi, you don’t need any fixing store to fix it. Probably the issue with the metal pin, which brings rotation power from the motor to the blades. Check how I repaired my blender, easily on repair your blender, easy fix video. And it will costs you few cents, in the repair shop they will charge you at least 10$ for the fix.
I got exactly the same issue, my blender stopped to spin, and, I found the issue was in metal drive pin. I bough the one in the hardware store close to my house, and it cost my cents. Watch how I did repair of my blender in the '''Oster Ozterizer blender repair - small fix''' video. You don’t need to much to fix it, just a screw drivers.
Hi, in my case I only needed a screw driver, but of cause, it depends on what actually is broken. If you just need to replace the small metal drive pin which you can probably find in a close hand tools shop, so no more tools need for it. Watch how I did in my blender easy and fast repair video. But if you need to do some wire replacement or engine replacement, you may need more tools, including a soldering.
Hi, be careful with the bad quality screens. I called to Asus itself, they don’t sell original screens. So the screens that you can find are from alternative manufacturers. Check this video: https://www.youtube.com/watch?v=YT1Skjqm... you’ll see full guide about screen replacement, and the links to the “Bad” sellers, who sells bad quality screens. In my case, I’m keep looking for the reliable seller.