I had a similar issue with my vacuum a while back. Even though the belt seemed okay and the suction was working, the beater bar refused to spin. It turned out the gear the belt sits on was entangled with hair and threads. I unplugged the vacuum, opened the beater bar cover, and removed the bar and belt. After clearing the debris from the gear, I reassembled everything, and voila! The beater bar started spinning again. As for the standing issue, it might be separate, but always worth checking if there's any wear on the vacuum's base or locking mechanism. Here is how you can rid of this problem more better way.

One day, while vacuuming my living room, I noticed it started spitting debris back out. Panic set in! I turned it off, and checked the dustbin. It was full to the brim. I emptied it and then took a look at the filter. It was clogged with dust. After giving it a good clean and removing blockages in the hose, my vacuum was back to its old self, efficiently picking up dirt. Remember, a regular check-up can save a lot of hassle. You might get more value here, I found it much informative for me.

Along with this issue a few users are facing issue with their watch that it keeps responding without any touch. So, here are a few methods to fix the watch facing Ghost Touch issue.

I was experiencing the same issue but after reading a troubleshooting post I was tried all those method on my Forerunner watch and now it is showing the accurately correct time. You can try these method they will help you as well.

T3 Hair Straightener Not Heating UP. Here a few possible solutions that you should try to fix your T3 straightener. (1) factory reset straightener (2) ensure the screen is locked (3) and straightener plugged correctly into power source (4) check your power source working correctly here you can read more details to fix T3.

here are few steps which i was tried and got my straightener fixed you can also try these to fix yours

here it will be helpful for you https://pakcentric.com/why-does-my-straightener-keep-turning-off/

Don't worry if your Fitbit Luxe is not charging. You should try the methods below: (1) Use original charging cable (2) If you have not use it for several months then plug it on charger and check after 2 hours. (3) Change power source (4) Connect charging contacts and pins correctly (5) Remove protective strip from charging pot (6) And I have put the more details in this My Fitbit Luxe Not Charging

I faced a similar issue with my vacuum. It would only work when tilted and shut off when upright. After ensuring there weren't any clogs and checking other parts, I was puzzled.

I reached out to the vacuum manufacturer, and they informed me that the machine has two motors. One of the motors might've overheated.

The solution? Unplug and leave it for about 90 minutes to cool down and reset. Sure enough, after waiting, it worked flawlessly. So, before considering repairs or a new purchase, give your vacuum some time to "rest" and reset!