Respuesta a "Stationary AirCon unit overheated compressor"Buy the new unit. it will be more cost effective for you.
Respuesta a "Is the thermal paste and processor okay?"The thermal paste looked dry, the board shows signs of heat, you might consider an after market fan , if it fires up and runs it is ok, I would run a newer fan if I was you.
Respuesta a "Why is my Hotpoint (FFU4DK) American style refrigerator not cooling?"The refrigeration effect is 100% from the freezer compartment, the refigerator box gets it’s cold air from the freezer compartment.: If the freezer is actually working fine and makes ice that is not wet , the refrigeration cycle is working as evidenced by it’s ability to make ice that is dry. There are 2 control dials for the refrigerator , one will say OFF and 1 through 10 typically, 10 being coldest. This dial is the actual thermostat that cycles the compressor on and off, it has an OFF setting that shuts off the compressor . The 2nd dial typically will also be numbered 1 through 10, ten being the “COLDEST” setting as is the 1st dial. This “COLDEST” setting for the 2nd dial actually say’s colder freezer! what happens many times is someone will say , the fridge seems warm I will make it colder, so they proceed to peg both dials to 10 since that is the setting for “COLDEST”, logically that means coldest refrigerator, but what happens when both dials are set to their maximum cold setting, the air that is...