Unresponsive Sleep Hold Switch?After a full charge. I am able to use the unit. Then when finished I turn it off but it then starts to power back up with...
Respuesta a "Unresponsive Sleep Hold Switch?"I solved this. Under a magnifying loop, I found a thread, or piece of fiber that had entangled the gold connection to the hold switch on the motherboard.The thread was enough to ground the hold switch circuit, just like a stuck power switch. One annoying piece of debris later, I have a fully functional touch! - John B.
Respuesta a "Turns on & off every 8 seconds"'Same Problem...But Power Switch is OK.' My touch 1st gen suffers from the same affliction, but the power switch is not the culprit. My touch continues the failure mode even when the back is off, ie power switch is out of the loop. I have restored the OS to no avail, so I doubt it is a software issue. Any ideas? -, John B.