Respuesta a "Beats Studio3 Wireless status lights never indicate full charge"Hi, this usually indicates a “bad" battery. By “bad" I don't mean, completely useless. Lithium ion batteries start to lose the maximum capacity at which it will fully charge over time. So what happens is, the battery will be fully charged to it capacity, but not as charged as it originally was. For instance, the Beats 2 battery has a max capacity of 56mAh, but it may only charge to 54 or 55mAh. The best way to fix this is to replace the battery, but if you're not noticing any major decreases in battery life (battery only lasts 2 hours instead of 10), you probably don't need to replace the battery yet. Hope this helps.
Respuesta a "HDMI port Not working"Hi, what most likely happened is some of the capacitors popped off when it hit the ground. The HDMI port on a PS4 is the most susceptible part to damage on the whole system. The only way to properly fix it is to do a full teardown on the PS4 and see what components popped off.
Respuesta a "Values of missing components"Hi, the top “piece” out of the three missing is a diode and the other two are resistors. The PS4 will work without the diode, but those two capacitors are necessary. I had this same problem. I'm not sure of the exact values, but you can buy the HDMI portion as a donor piece on Ebay and just transfer the components over. Below is the Ebay link, I hope this helps. https://www.ebay.com/itm/Original-OEM-replacement-HDMI-Port-GENUINE-PlayStation-4-PS4-ON-MOTHERBOARD/282827010654?_trkparms=aid%3...-8a00-11e9-a80c-74dbd180959a%7Cparentrq%3A37acf08416b0aa...