Mariano Lobo

Passenger rear power window would not work because the regulator frame was bent. I straightened the frame, reinstalled,...

The water valve of the washer are operated by a.c. voltage that are applied by a programmer (cam switches). It is possible at the rinse cycle the cam switches are intermittent or do not apply full voltage to open the valves, resulting in narrow or intermittent streams. Try to examine the cam switch if are inclined to.

Good evening Nicolas and happy new year,

I have used your advice and many tricks on my 1984 300tdt. Your site is wonderful and helped me on most of my repairs. Thank you.

One of them was repair of the rear window regulator. It was bent and did not

operate at all. As per your instructions, I straightened the bent metal parts in a vice and after installation it worked. However, when it closes

the motor does not stop unless I release the button. The motor stops when it reaches the bottom position, even if the button is actuated. Is

there an adjustment that I have to do to accomplish the same when the window closes?

Many thanks for your time. Please email me on: marianoalobo@gmail.com

Mariano Lobo