Scientist/Sailor with too much time on my hands most evenings/weekends because I'm more introverted.
I also found that on my version I only needed to remove the passive driver from the end with the lanyard hole.
I used a two spudger method. I got one in and used it to keep the outer housing away while I got another one in. Much easier. However, hold off on prying one side away until you get the other side loose.
I had the same thing, 6 #0 screws to remove a panel with the power button circuit board. And I had to chisel/scrape away some soft black glue to release the battery cables.
On my version, I found that a #0 Phillips worked better.
I had this version/problem as well.
Media vez obtengan, podras ver un gráfico de la reputación que han obtenido con el tiempo.
Aquí está una vista previa de cómo lucirá el gráfico:
Aún no has no adquirido reputación.