Owen Baker

I have an iPhone X that was dropped and will only charge to 3%. What’s the issue?

So i tried replacing na iphone x mute switch flex cable and the mute switch doesnt have tha click when you flick it up and...

I need a good hot air station for back glass repairs. What’s a good one that doesn’t cost to much?

What is the best method for removing the back glass when it’s cracked? What glue do I need to use to glue it back down?

I have an iPhone XS with a completely smashed screen. I have tried a ZY OLED and touch doesn’t work. I’ve heard that you...

Ive had some issues replacing the taptic engine. Like connecting the taptic engine itself to the charging port. please help

I need a screen for an iPhone X and there are 2 types of displays. There is soft OLED and hard OLED. Which is better?

I have a friend that wants me to replace a screen on his XR. Is there anything I need to look out for? I have replaced...

I have an iPhone XS Max and I can’t receive images from people with android phones and I also can’t send them to android...

How do I get this hex nut out. My bit just keeps spinning over it

This could be three things: a bad battery a bad charging port logicboard issue Try Replacing the battery first. Then the port. If neither of those work it’s a board level problem.

I’ve noticed this happens with low quality screens. Try a new screen.

Rewa has just recently made a video on this. It cannot be fixed by a 3rd repair. You have to go to Apple but even then they won’t work on the phone because you swapped the battery.

You can use a computer program called 3U tools and it’s on windows only. It shows you what parts have been replaced without opening the device.

It’s could be the NFC antenna. Try replacing that and go from there.

Sometimes with the iPhone X earpieces get a little tear in them it’s very quiet. Try installing a new earpiece speaker and go from there.

Honestly just let it dry out. It will sound fine after it’s dried out.

It’s just a bad display. You need to replace the screen and everything will work just like it did.

Well from my experience, certain aftermarket displays the touch doesnt work. That happens because the displays are calibrated by a machine that we don’t have access to. You basically just have to go through displays and see what works and what doesn’t. Good luck with repairs!

Sounds like a torn home button flex. No much you can do but replace the button and lose Touch ID and keep home button functionaly.