Albert

Hi there, I have recently encountered an issue with my Sharp smart TV remote controller, I managed to disassemble it and...

I got my laptop back in 2013, it works well, sometimes, when I tried to shut down or restart by clinking Shutdown or...

One of my friends purchased the phone back in 2014, he denied every update when he got the phone, now when he checked the...

I just noticed that there’s a notification said “Send: checking drive permission” when I send email via Google Gmail on my...

My hard drive has 32gb and I encountered the error while tried to restore the settings back to factory settings. Please...

The live tile does not display the products on the current version or release of the MS Store. Is there anything wrong?

Apple admitted that is was slowing down older iPhones in order to preserve battery life and avoid crashes. But this...

My iPhone 7 rang, and there's a loud hissing noise that really scared me. What's wrong with that? And how can I fix the...

I was getting this message too whenever my iPhone restarts. Even though iMessage on my iPhone was working as expected as I...

One of my friends recently updated his iPhone 7 to iOS 11, something strange has happened. He had lost the contacts. He...

If your laptop shuts down once you unplug the adapter, it naturally means your battery is not operating properly. Most likely, your battery reached the end of its useful life and stopped holding a charge. Another possibility is that the battery connector inside your laptop is damaged. A good test firstly could be to plug the battery of a similar laptop and check if it works with the other device. Sometimes, the problem could be that the BIOS is obsolete. This affects the chipset and subsequently, the communication between the battery and laptop. Thus, you could update the BIOS.

While the "TOSHIBA" logo is displayed, press the F2 function key to start BIOS Setup. Check the version of BIOS and press the F9 function key then Enter to load setup defaults. Press the F10 function key then Enter to save settings and exit. The computer will automatically reboot. Most often, resetting the BIOS will reset the BIOS to the last saved configuration, or resets your BIOS to the BIOS version that shipped with the PC. Sometimes the latter can cause issues if settings were changed to take account for changes in hardware or OS after install. Make sure you backup the previous BIOS version.

If you go to the parental mode and click the switch to Android button there are settings for the wifi in the Android platform settings. You can set up there and then check if it is working.

Screen flickering problem is typically caused by a faulty hardware like when a device was dropped and/or physically damaged after a strong impact. Sometimes software can also cause the issue. There are a few steps you can follow to find out whether the issue is software or hardware-related. https://www.samsung.com/uk/support/mobil...-devices/what-to-do-if-the-screen-on-your-device-is-flickering/

It could be a dead motherboard. You can try an EC reset: remove your battery and charger, press and hold power button for 5 seconds, then reconnect battery and/or charger and try to boot the laptop again. Or kindly check out these methods. https://www.minitool.com/data-recovery/fix-pc-turns-on-but-no-display.html

If neither cleaning the game cartridge nor cleaning the cartridge slot not work, you will need to inspect the pins that connect the cartridge slot to the motherboard to see if there are any broken connections. Kindly check out Nintendo 64 Troubleshooting by ifixit below. Nintendo 64 Troubleshooting

The only other way to look for signs of life - to find out if the whole device is malfunctioning or just the screen, is to hook it up to a computer. Does the computer see it and interact with it or is there no response? Have you tried to give it a reset? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting.

You can upgrade your HP EliteBook 8460p Laptop to up to a maximum memory capacity of 16GB Memory. DDR3L is a dual voltage capable memory DIMM, which supports operation at both 1.5V and 1.35V. DDR3L is also pin-compatible with DDR3! DDR3 is a single voltage capable memory DIMM, which supports 1.5V operation only. Basically you can use either.

If you can't adjust your keyboard's brightness manually, it's likely because you're in a very bright environment and you have your Mac set to automatically adjust the brightness. In this case, the backlit keyboard turns off. When you move to a location with less light, you can once again adjust the keyboard's brightness. Otherwise if you just prefer using your mouse–you can adjust brightness in OS X and see if it is working.

Even the third-party resellers no longer stock this item. But there are some similar ones that will working for your purpose.