Albert Einstein

Hi, Whenever I open the lid of my surface book 2, the hinge makes a slight crinkly sound, like a plastic wrapper being...

Toshiba portege x20w-d Hello! I was using this computer when all of a sudden it froze, and a buzzing sound was heard from...

I have been handed a phone to fix which has no cellular reception, but connects to WiFi. What would you recommend would be...

I cannot receive any calls on this phone, yet it can make calls. It receives the text saying I missed a call, but the call...

Does anyone know where to buy a replacement board or battery for the charging case?

Hello! I have been given some water damaged AirPods to fix. Apparently the actual AirPods work, but the case doesn’t after...

I have a smashed silver corner on the back of this Toshiba Portege X20W-D next to the screen hinge. How can I replace it?

I was trying to set some adhesive on the screen to keep it in place (as the pentalobe screw sockets snapped off), and I...

Hello! I was wondering is I could add something to an iPhone 6 to make it water resistant. I already have the screen...

Can I put screen adhesive from iphone 6s on an iphone 6?

Take it to an Apple Store and try and get it replaced for free under your consumer rights.

iOS 13 doesn’t make the battery nonfunctional, but just tells the user to replace it., with a “Service”message under the battery health feature.

This has intentionally been done by Apple so that you will lose trust in independent repair. The battery itself is fine, and will work fine. https://www.ifixit.com/News/apple-is-locking-batteries-to-iphones-now

There’s no possibility of overcharging the battery as the charger disconnects from the battery when you reach 100%. Read this post on how you can care for your battery: https://www.ifixit.com/News/how-to-care-for-your-laptops-battery-so-it-lasts-longer

Just before you order a new screen, open the phone and check that all the cables are firmly attached. There’s no harm in checking and it could save you time and money. Only then should you replace the screen

Unfortunately they aren’t compatible. They both have different proprietary connectors, so they won’t physically plug into each other.

There is a product called an “iMesa touch ID repair kit” that you can buy from the internet. However, this is difficult to apply and requires microsoldering skills, and it depends on where the cable broke. If you are not experienced, then Jeff Suovanen’s answer is probably the best - you will either have to give it apple or a microsoldering repair shop.

No - not possible. Many have tried, but it cannot be unlocked

The problem with a branded housing is that it has an apple logo on it, which is copyrighted, making it illegal to manufacture. You can either buy a new unbranded housing, or a branded used but high quality housing. iFixit sells unbranded ones here iPhone 7 Blank Rear Case. (I just put that there to help others who come to this page later on). You mentioned that you needed a branded housing, and that probably won’t be of much use to you. For branded housings, I have always found good branded housings on eBay. I would try searching there

The first thing you would try would be to check if the cables are correctly in place. Open up your phone, disconnect the battery, then unplug the screen cables and reconnect them again. The next thing you would try would be a new screen. Try replacing your screen with this guide Reemplazo del LCD y digitalizador de un iPhone 6 Then, if that doesn’t work, then if would be a problem with the touch IC. You mentioned that your phone was bent. Can you see any weird grey bars on the top of the screen? That is often a symptom. Having a bent phone can damage the touch IC and display ICs, which stops the touch screen from working. If a new screen doesn’t fix it, I would suspect it is a problem with these ICs. It is a common issue in the iPhone 6, Bring it to a micro-soldering repair shop, and they should be able to fix this.