Este perfil no está completo aún.
Respuestas
Clean the headphone jack it will work, if not you needed to replace the Headphone Jack & Volume Control Cable
Leer másCan you tell me the device had fall? try to refixed the display once, if not it is fallen then the display is got damaged inside and needed to replace.
Leer másTry to hard reset holding power button and home button till it turn on, if it is not working check the lcd and lcd connector whether damaged or not, if lcd damaged needed to replace and if connector needed to do micro soldering
Leer másI think u have damaged the home button ribbon cable so you have to replace with new home button ribbon cable and only home button will work and touch id will not work.
Leer másAfter connecting new screen try for hard reset. Reset the iPhone by holding the sleep/wake button at the top right of the device and the home button at the bottom center of the face at the same time. Hold them both until you see the screen go black. Wait until the white Apple logo appears. When this happens, you can let go. The device will reboot. If this is not working you to replace with geniue display.
Leer másReplace with new battery and dock connector and restore it will work
Leer másThis sounds like body (back panel) is having small dent and so it is pop up the display and try to file the body, if not you have to replaced the body (back panel).
Leer másfirst try with new display replacing it will work, if not it will be touch ic issue so needed a micro-soldering repair.
Leer másYes you have to replace the front camera ribbon cable assembly, then only it will work bcoz once i replace the display by mistakely the front camera cable was got damaged and i start connect all the connectors the device was stuck and i replace the front camera cable assembly it worked for me, So pls try it
Leer másThis sounds like logic board issue i.e. u2 charger ic needed to replace, this can not be done by you, so you have to take to mobile micro-soldering repair shops.
Leer másPág. 1 de 3