anthony: Unplugging the right speaker connector was done in step 23.
In bullet #1 I lifted logic board from left side (nearest battery), tilted toward right side (port side) and pulled to to the left a bit to get ports out of chassis cutouts.
Then I followed bullet #2.
Instruction looks scarier than actual things, doing it is easier. Just be careful and take your time. ;)
Pry the speaker connectors *up and out*. Doing it from the cable's sides, next to connectors, is easier.
The second picture and illustration are not clear enough. The text should say "pry underneath the cable" as I almost broke the fan cable following instruction.
Media vez obtengan, podras ver un gráfico de la reputación que han obtenido con el tiempo.
Aquí está una vista previa de cómo lucirá el gráfico:
Aún no has no adquirido reputación.