Menú
Tus configuraciones
Cancelar
Este producto no está disponible en tu país.
Codigo del Articulo: IF146-008-1
Este producto no está disponible en tu país.
USD9.99
Descuento de iFixit Pro aplicado. Reg:
USD9.99
Partes usadas A-Stock están en excelente condicion
Partes B-Stock tienen un desgaste cosmético de menor importancia
Partes C-Stock tienen un mayor desgaste cosmético, pero son totalmente funcionales
USD9.99
Descuento de iFixit Pro aplicado. Reg:
USD9.99
Agotado
Listo para Enviar
Agotado
Listo para Enviar
No tenemos mucho stock disponible
Detalles del Producto
Descripción
Descripción
Replace a dead or damaged battery compatible with a fourth generation iPod Touch with this part.
Compatibilidad
Compatibilidad
Especificaciones
Especificaciones
Instrucciones
Cuentos de Reparación
La Bateria ya no estaba funcionando bien por lo que decidí cambiársela yo mismo.
Compre la Bateria y el kit de reparación de iFixit, leí cuidadosamente la guía para el reemplazo de la batería paso a paso. Al estar ya seguro de haber comprendido el proceso comencé a desarmar el iPod debo de reconocer que fue muy dificil pero con mucho cuidado y paciencia logre reemplazar la batería satisfactoriamente y sin daños.
El unico problema que tuve fue que el destornillador Phillips #00 de iFixit no logro sacar los tornillos este no se adapto bien a ellos y me molesto mucho ya que se supone que lo compre para ese motivo, afortunadamente tenia una herramienta que lo hizo sin ningún inconveniente. Por favor iFixit solucionen este problema.
Al final todo salió muy bien y estoy contento de haberlo podido realizar gracia a iFixit.
El consejo que puedo dar es que lean cuidadosamente la guía paso a paso así como visualicen las imagenes a detalle del proceso esto fue la clave de que mi reparación fuera exitosa.
al desarmar cada pieza asegurense de colocarlas en un lugar seguro para que no se les pierda por que por ser tan pequeñas son muy fáciles de perder sobre todo los tornillos.
El Ipod esta funcionando hasta ahorita sin ningún problema solo espero que la batería sea de buena calidad y se desempeñe como deba.
Gracias iFixit!!!
y a todos los demás les deseo "Felices Reparaciones"
Saludos desde Guatemala
La Bateria ya no estaba funcionando bien por lo que decidí cambiársela yo mismo.
Compre la Bateria y el kit de reparación de iFixit, leí cuidadosamente la guía para el reemplazo de la batería paso a paso. Al estar ya seguro de haber comprendido el proceso comencé a desarmar el iPod debo de rec . . .
battery needed replacement
good
no
Battery only lasted about 1 day on charge without using it.
All went well with the disassembly. Problem came when putting it back together. There is a little ribbon cable from the touchscreen that is very short and does not like to be put back on by human hands. I finally got it back together and now this old iPod Gen4 is working like new.
Take your time when putting it back together and watch out for that little touch screen cable. You will get it, just go slow.
Battery only lasted about 1 day on charge without using it.
All went well with the disassembly. Problem came when putting it back together. There is a little ribbon cable from the touchscreen that is very short and does not like to be put back on by human hands. I finally got it back together and n . . .
original battery reached end of lifecycle
well! took some time, because of sothering new battery to device. quite tricky but feasible with a nice repair Tutor video on the net.
be VERY careful with that sothering of battery, cause extremely close to delicate pieces that wouldn't bear a damage if coming to close with sothering iron
original battery reached end of lifecycle
well! took some time, because of sothering new battery to device. quite tricky but feasible with a nice repair Tutor video on the net.
be VERY careful with that sothering of battery, cause extremely close to delicate pieces that wouldn't bear a damage if comi . . .
iPod would die instantly when disconnected from charger
Better than expected, only thing that went wrong was the volume down button doesn't work anymore
Just have all tools prepared before attempting the repair and if you have unsteady hands have someone hold the battery over the solder pads while you solder it in place
iPod would die instantly when disconnected from charger
Better than expected, only thing that went wrong was the volume down button doesn't work anymore
Just have all tools prepared before attempting the repair and if you have unsteady hands have someone hold the battery over the solder pads while you . . .
I had to change the the battery of my iPod touch 4G because it was too old and didn't last for long time anymore
The repair was really hard. Apart from removing screws and disconnecting some components, I didn't realize that I broke the link to the volume controls, but it had been the only problem until I realized that I had to unsolder the old battery and to solder the new one, and if am really bad at soldering. I don't know what went wrong, but I ended up throwing my iDevice because after one day of work, I still couldn't make it to solder the new battery.
MY ADVICE IS TO TRY TO REPLACE THE BATTERY OF THIS IPOD TOUCH MODEL ONLY IF YOU ARE GOOD AT SOLDERING, OR YOU WILL END UP THROWING YOUR DEVICE AWAY.
I had to change the the battery of my iPod touch 4G because it was too old and didn't last for long time anymore
The repair was really hard. Apart from removing screws and disconnecting some components, I didn't realize that I broke the link to the volume controls, but it had been the only problem un . . .
The 1TB hard drive in my 2011 iMac started failing. Luckily I had everything backed up on externals. I was super excited to see that iFixit had a dual hard drive kit, so I ordered that plus a 500GB SSD for my boot drive and a 3TB HDD for bulk storage.
The repair went amazingly well. A co-worker helped me with the repair which was VERY important when we were taking the screen off. We took our time and were very gentle with all the connections, so nothing was damaged. It was a great opportunity to clean out all the dust with canned air too.
The instructions were very clear and well defined, with excellent pictures. Using iFixit's Magnetic Project Mat and Pro Tech Toolkit made everything much easier and faster. It took us 3 hours total to tear it apart, install the dual HD kit + the 2 HDs and put it back together. We all held our breath when we plugged the power back into it and pushed the ON button... success! High fives for everyone.
Before we got started I was nervous about repairing my own computer. Now that I (with help) have repaired my own computer I am much more confident that I can repair other devices using the guides on this website.
I simply wish I had believed earlier that electronics repair isn't magical or out of reach as long as I have the right tools and an excellent guide to follow. By doing in-house repair we saved a lot of money (was even thinking of just buying a new computer initially), plus my computer is way faster and cooler than it was before.
Advice? JUST DO IT.
The 1TB hard drive in my 2011 iMac started failing. Luckily I had everything backed up on externals. I was super excited to see that iFixit had a dual hard drive kit, so I ordered that plus a 500GB SSD for my boot drive and a 3TB HDD for bulk storage.
The repair went amazingly well. A co-worker helpe . . .
Very early model ipod4 would not hold a charge anymore. The battery lasted 30 minutes at most.
My very early model ipod4 was ALMOST identical to the repair guide but with some extra bits. Mainly some of the parts were held in with a black rubberized tape that had to be cut to remove parts. Other than that the instructions were right on.
I would say that you have to have experience with this kind of repair and be comfortable working with electronics and the ever-lingering fear that you will break something. You need to be able to tell how much you can push, pull, or flex something and that is just a sense that techy people have.
I was most afraid of the soldering but that was actually very easy. Once I heated the solder pads on the battey cable they came right off very easily, solder and cable together! I was left with a very clean board to solder the new cable to.
Very early model ipod4 would not hold a charge anymore. The battery lasted 30 minutes at most.
My very early model ipod4 was ALMOST identical to the repair guide but with some extra bits. Mainly some of the parts were held in with a black rubberized tape that had to be cut to remove parts. Other th . . .
Weak battery after recharge duration was only 25 min.
It was very easy to open the IPOD. I fallow youtube short movie.
But I had to open the IPOD 3 times.
1. Battery was not charging after installation
2. IPOD need to be cool to use
3. Happy! Happy! Happy! finally. Working great. Charging well.
The contact between the battery and the IPOD need to be perfect. Thin.
Thank you IFIXIT ! For the next battery change I will do the same.
Heath well with hair dryer before open the IPOD with the tool from IFIXIT. When open the IPOD do it carefully. Do not use tools to open on the camera side. Open slowly. When remove the battery heath before under battery. Not much. Few minutes. After bingo. The connection of the battery need to be very thin.
Good luck !
Weak battery after recharge duration was only 25 min.
It was very easy to open the IPOD. I fallow youtube short movie.
But I had to open the IPOD 3 times.
1. Battery was not charging after installation
2. IPOD need to be cool to use
3. Happy! Happy! Happy! finally. Working great. Charging well.
. . .
My son's iTouch's battery was only lasting for about 25 min. - very annoying. After reading the repair manual, I decided to give it a try.
The repair went just like the manual suggested. I really appreciated the warnings offered in the manual as well as other people that made suggestions of caution. I can't believe how much glue is used to hold the 4th generation iTouch together. That was pretty annoying, especially trying to get the battery out. Does it really need to be glued that secure? Wow!
I scratched the black paint on the underside of the display glass somehow with the plastic opening tool. It doesn't show too bad, but that is the only problem I had with the repair. One other suggestion is to flatten the glue down with a tool and then use a heat gun to warm it when putting the display glass back on.
My son's iTouch's battery was only lasting for about 25 min. - very annoying. After reading the repair manual, I decided to give it a try.
The repair went just like the manual suggested. I really appreciated the warnings offered in the manual as well as other people that made suggestions of cauti . . .
Mostrar más
Mostrar menos
Clientes también compraron
