iPod nano (2nd Gen) Replacement Battery

  • iPod nano (2nd Gen) Replacement Battery / Part Only
  • 360°
360
iPod nano (2nd Gen) Replacement Battery

USD13.99

USD13.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

Detalles del Producto

Descripción

Descripción

Replace a dead or damaged part. This battery is compatible with a 2nd generation iPod nano.

Compatibilidad

Cuentos de Reparación

Avatar de usuario
Trevor Bugera's Story Photo #153784
Trevor Bugera's Story Photo #153785
Trevor Bugera's Story Photo #153786

Mi Problema

Both my wife's iPod Mini and her friend's iPod Nano had terrible battery life, and recently the Mini started showing the "Sad iPod" icon. I thought if I replaced the battery, the Mini might get a proper charge, and I could also check the hard drive's connection.

Mi Solucion

Overall, the repair was 50/50. The N . . .

Avatar de usuario
thitipongtanprasert's Story Photo #133933
thitipongtanprasert's Story Photo #133935

Mi Problema

Three main problems for me :

1. The plastic pryer (green) didn't work well for me. It was finally crumpled. So I used a small flat-head screw-driver instead. Slightly scratched the nano but not significant.

2. I have no lead-removing strip. But a rather big vacuum one. Successfully cleaned up one . . .

Avatar de usuario

Mi Problema

This iPod had been washed long ago, and the battery was dead

Mi Solucion

Unfortunately this iPod had been heavily used an abused by my son, such that the back of the case was a bit dented in a few spots (and the corners were a bit rounded in). The main problem seems to be that the back dents decreased the intern . . .

Avatar de usuario

Mi Problema

The battery after several years did not work anymore....

Mi Solucion

I used the Guide to remove the battery and put a new one

Mi Consejo

Everything works fine!

Avatar de usuario

Mi Problema

My iPod Nano is 6 years old and will not hold a charge for about a year now. Decided to replace the battery so I don't have to have it plugged in to use it.

Mi Solucion

Received the new battery and tools. The screwdriver is fine but the plastic tool to remove the ends broke right away. I used a small screw driv . . .

Avatar de usuario

Mi Problema

battery was running down. I was disappointed that the battery that once lasted nearly a day was only giving me 3 hours.

Mi Solucion

It took 3 hours. It was kind of hard getting the case open and the battery was held in with strong tape. The battery wires were covered in hard to remove silicone and I didn't have . . .

Avatar de usuario

Mi Problema

Exausted battery

Mi Solucion

Well, almost exactly how explained in the guide. We fixed the battery cables instead of removing them.

Mi Consejo

Be really careful with step 11 when reassembling!

Avatar de usuario

Mi Problema

The Nano had stopped holding a charge.

Mi Solucion

Fairly well given the very high difficulty of the repair. The end result was success.

Mi Consejo

Desoldering the old battery was definitely the hardest part. Desoldering braid is a must, however it was impossible to remove every last bit of solder necessary to free the wire . . .

Avatar de usuario

Mi Problema

Original battery only held charge for 10 minutes.

Mi Solucion

Repair went ok for first time ipod repair. Taking it apart wasn't bad. A bit more of a challenge putting it back together.

Mi Consejo

After repair, appeared that iPod was not working. Required reset after installing new battery. Flip Hold switch back and fort . . .

Mostrar más