iPhone 6s Plus A1634 Parts
Grab a toolkit for your iPhone 6s Plus A1634 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Partes que funcionan con iPhone 6s Plus A1634:
iPhone 6s Plus Lightning Connector Cable Conductive Adhesive
Replace the gold-colored conductive adhesive area on the flex cable of the lightning connector assembly compatible with the iPhone 6s Plus.
iPhone 6s Plus Rear Camera Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector compatible with the iPhone 6. Includes a set of 5 pads.
iPhone 5 to 6s Plus Front Camera Gasket Pads
Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.
iPhone 6s Plus LCD/Digitizer FPC Connector (J4200)
Replace the LCD/digitizer cable FPC connector on the logic board compatible with iPhone 6s Plus model A1634, A1687, A1699.
iPhone 6s/6s Plus/7/7 Plus Backlight Filter
Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.
iPhone 6s and 6s Plus Front-Facing Camera Holder
Fix a misaligned camera by replacing the plastic guide that centers the front-facing camera over the camera lens opening in the front glass panel. This part is compatible...
iPhone 6 Plus/6s Plus/7 Plus Battery Adhesive Strips
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6 Plus, iPhone 6s Plus, or iPhone 7 Plus smartphone model A1522, A1524, A15...
iPhone 6s Plus Rear Camera Lens Cover
Replace an external lens cover for the rear-facing camera compatible with the iPhone 6s Plus.
iPhone 6s Plus Display Assembly Adhesive
This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 6s Plus A1634, A1687, A1690, A1699 models.
iPhone 6s/6s+/7 Backlight Driver LM3539
Replace a LM3539 backlight driver on the logic board of an iPhone 6s, iPhone 6s Plus, or iPhone 7. This part requires micro soldering.
Info de Dispositivo
The A1634 iPhone 6s Plus model is compatible with LTE bands 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 18, 19, 20, 25, 26, 27, 28, 29, and 30 as well as TD-LTE bands 38, 39, 40, and 41. It is intended for many carriers in the United States (and sold optionally locked to AT&T), but was also offered unlocked, contract free, and without a bundled nano-SIM for use on practically any carrier, starting on October 8, 2015.
The most commonly needed repairs for the iPhone 6s Plus are cracked screens and dead battery replacements. iFixit carries the best iPhone 6s Plus screens and iPhone 6s Plus batteries on the market, plus a complete catalog of other iPhone 6s Plus parts for the less common fixes.
All iPhone 6s repairs will require a Pentalobe P2 screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. All iFixit Fix Kits come with all tools and replacement adhesive need to complete the repair.
Once all parts and tools have been acquired, check out iFixit’s iPhone 6s Plus repair guides for step-by-step instructions on how to make the fix.
The iPhone 6s Plus earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: