iPhone 6s A1700 Parts
Grab a toolkit for your iPhone 6s A1700 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Partes que funcionan con iPhone 6s A1700:
iPhone 6s Lightning Connector Cable Adhesive
Replace the adhesive area on the flex cable of the lightning connector assembly compatible with the iPhone 6s.
iPhone 6s Battery Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s LCD Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the LCD cable connector compatible with the iPhone 6s model A1633, A1688, and A1700. Includes a set of 5 pads.
iPhone 6s Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 6s. Includes a set of 5 pads.
iPhone 6/6s Antenna Interconnect Cable Clip
Replace the small metal clip that holds the antenna cable from the lightning connector assembly against the side of the loudspeaker assembly compatible with the iPhone 6 ...
iPhone 5 to 6s Plus Front Camera Gasket Pads
Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.
iPhone 6s/6s Plus/7/7 Plus Backlight Filter
Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.
iPhone 6 Home FPC Connector (J2118)
Replace the home button cable FPC connector on the logic board of an iPhone 6. This part requires microsoldering.
iPhone 6s and 6s Plus Front-Facing Camera Holder
Fix a misaligned camera by replacing the plastic guide that centers the front-facing camera over the camera lens opening in the front glass panel. This part is compatible...
iPhone 6/6s/7 Battery Adhesive Strips
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6, iPhone 6s, and iPhone 7 smartphone models A1549, A1586, A1589, A1633, A1...
Info de Dispositivo
This model of the iPhone 6s is intended for use within mainland China on China Mobile, China Telecom, and China Unicom. It has the same specification as the A1688, specifically, it supports 4 GSM bands, 7 UMTS bands, 22 LTE bands, and 4 CDMA bands. Alongside the existing gold, silver, and space gray options, a new rose gold color option was also introduced.
One of the largest reported hardware issues with the iPhone 6s was unexpected battery shutdowns. Apple issued a warranty for phones with a limited span of serial numbers, however if your phone doesn’t fall under this category, don’t worry — iFixit has all the parts necessary for the most common iPhone 6s fixes including dead battery replacements and cracked screens. We’ve got the best iPhone 6s batteries and iPhone 6s screens on the market, along with a complete catalog of other iPhone 6s parts for the less common part swaps.
All iPhone 6s repairs will require a Pentalobe P2 screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete the repair.
Once you’ve bought your parts and tools, check out iFixit’s iPhone 6s repair guides for step-by-step instructions on how to make the fix.
The iPhone 6s earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: