iPhone 3GS Front Panel

  • iPhone 3GS Front Panel
iPhone 3GS Front Panel

Condición: Usado

USD9.99

USD9.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

Detalles del Producto

Descripción

Descripción

Replace a cracked glass screen on your iPhone 3GS and fix a digitizer that no longer responds to touch.

El Ensamblado de Partes Incluye

El Ensamblado de Partes Incluye

  • Touchscreen Glass
  • Integrated Digitizer
  • Adhesive Strips

Video de Instalación

Compatibilidad

iPhone 3GS
16 GB
32 GB
8 GB

Cuentos de Reparación

Avatar de usuario
dgantt1994's Story Photo #259491
dgantt1994's Story Photo #259489
dgantt1994's Story Photo #259490

Mi Problema

My daughter dropped her (our old) iPhone 3GS and shattered the front glass. Her phone needed frequent charging so while I was repairing it, I decided to go ahead and get a new battery also. Took the opportunity to go ahead and order a new 4S rear panel for my wife's phone that was also cracked fro . . .

Avatar de usuario
gonzaoviedo's Story Photo #255197
gonzaoviedo's Story Photo #255199
gonzaoviedo's Story Photo #255198

Mi Problema

screen broken and rear case with too much miles.

The on/off button doesn't work and there was no volume up/down button

Oh! And the battery was almost dead :)

Mi Solucion

excellent!

Thanks to the guide, i had no trouble to make it work.

Mi Consejo

stick to the guide ;)

Avatar de usuario
TomSwift's Story Photo #338664
TomSwift's Story Photo #338661

Mi Problema

Had a shattered front glass on an spare, working 3GS that was being used as a perfect music storage device [via usb hookup into a JVC car stereo]. Wanted to fix the glass to use it as a phone in Europe, since the electronics were all operational in the phone. Touchpad worked fine through the shatter . . .

Avatar de usuario
outgolfing's Story Photo #304890

Mi Problema

I got hammered one night and tried to jump over a fence to impress a girl. Instead of landing on my feet, i landed on my phone and shattered the screen.

Mi Solucion

The repair went well, I highly recommend having the metal spudger handy when replacing the screen. The hair dryer i borrowed from the girl i was tr . . .

Avatar de usuario

Mi Problema

Front panel cassé!!

Mi Solucion

Bien été mais il faut faire attention de pas trop chauffer avec le heat gun!! Regarder aussi le vidéo en plus des étapes!

Mi Consejo

Suivre les étapes et prendre sont temps!!

Avatar de usuario

Mi Problema

My wife dropped her 3gs and the screen was pretty cheap. I already had a tool kit from a battery replacement, so this seemed easy enough.

Mi Solucion

Getting the phone apart was easy having done that before with the battery. My kid unscrewed it. Peeling off the broken glass from the plastic part that needed t . . .

Avatar de usuario

Mi Problema

Broken front glass on an iPhone 3GS, Again.

Mi Solucion

It was fast and much easier this time, maybe 40 minutes. But I had been in this iPhone several times before.

Mi Consejo

Be careful pulling off inside screen protection plastic, mine started to pull off the standoff also. Just push it back down and don't touch the ins . . .

Avatar de usuario

Mi Problema

I have a friend that shattered the glass on his iPhone 3GS and did not want to spend a lot of money on a repair. He had tape all across the front of the phone and it still worked. He asked if i could help him out and not pay a lot of money. After finding your website, i found what i needed and th . . .

Avatar de usuario

Mi Problema

I fixed it for the fun of looking how small these parts are. They made a good job of packing everything in a so small case. I changed the battery first and secondly the front panel. It works nicely.

Mi Solucion

I am not as talented as your personnel, and I did not want to break anything more. So I took my time r . . .

Avatar de usuario

Mi Problema

Front Panel was broken.

Mi Solucion

The Replacement went pretty well. But the supplied both side adhesive tape was just for the upper and the lower missing the sidelines, which are very thin. When I detach the old panel I did not care much to save the side lines. After reassembly, I found touch screen sensor doe . . .

Mostrar más