iPad 3/4 LCD

  • iPad 3/4 LCD
  • iPad 3/4 LCD
  • 360°
360
iPad 3/4 LCD

USD54.99

USD54.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

Detalles del Producto

Descripción

Descripción

Replace a flickering or dark 9.7-inch LED-backlit display screen. This part is compatible with a 3rd or 4th generation iPad.

Compatibilidad

Compatibilidad

  • iPad 3rd Gen A1416, A1430, and A1403
  • iPad 4th Gen A1458, A1459, and A1460

Especificaciones

Especificaciones

Part #:
6091L-1579A, 821-1240-A
Size:
9.7 in.
Resolution:
2048-by-1536 resolution at 264 pixels per inch (ppi)

Compatibilidad

iPad 3 4G
16 GB LTE/CDMA
16 GB LTE/GSM
32 GB LTE/CDMA
32 GB LTE/GSM
64 GB LTE/CDMA
64 GB LTE/GSM
iPad 3 Wi-Fi
16 GB
32 GB
64 GB
iPad 4 CDMA
16 GB
32 GB
64 GB
iPad 4 GSM
16 GB
32 GB
64 GB
iPad 4 Wi-Fi
16 GB
32 GB
64 GB

Mostrar 2 dispositivos más

Cuentos de Reparación

Avatar de usuario
John Rzucidlo's Story Photo #654041

Mi Problema

One of my customers had accidentally crushed the screen of her iPad in her motorized recliner chair mechanism. The screen and digitizer were shattered, and the LCD only displayed half the screen image.

Mi Solucion

Getting the broken glass from the front panel and digitizer off was a real challenge, and took me a . . .

Avatar de usuario

Mi Problema

My son broke his screen and digitizer for the second time, the last time I paid to have someone else fix it because I was unsure if I could do the repairs myself. After watching a few videos and doing a little research I realized it was a task that I could handle. So I bought the parts from IFIXIT a . . .

Avatar de usuario

Mi Problema

the phone was not holding a charge

Mi Solucion

The teardown was not that difficult using my Pro tool set from iFixit. It took me about 15 minutes to get to the part and remove it. During the removal of the bad dock i noticed a flex cable pop out and did not really pay attention to it like I should. Placed eve . . .

Avatar de usuario

Mi Problema

My wife's iPad 3rd Generation fell out of my truck and the front panel shattered. Then I broke the LCD while trying to repair the front panel.

Mi Solucion

I had a difficult time removing the front panel even with the iOpener. This would have certainly been an easier process if my front panel were not completel . . .

Avatar de usuario

Mi Problema

my screen was broken

Mi Solucion

excellent the screen is very excellent no problem with it yet. and it took me abt 20 min to fix it

Mi Consejo

No

Avatar de usuario

Mi Problema

My friend dropped his iPad down a set of stairs. it took a direct hit to the corner when it hit the tile floor at the bottom. Yhe Retina display stopped functioning. fortunately the touch screen survived. Using the manuals on this site I was able to safely remove the touch panel and see that the iss . . .

Avatar de usuario

Mi Problema

Bought an iPad, dropped it a couple times (on accident obviously) and ended up messing up the LCD display and it wouldn't turn on anymore. APPLE said they can fix it for $300

Mi Solucion

Went super smooth. It was easier then I thought and didn't run into any problems. ifixit says it difficult to replace the iPa . . .

Avatar de usuario

Mi Problema

shattered outer screen - LCD had a small spot

Mi Solucion

Removing the shattered glass was very difficult. There are a few pieces of debris between the glass, I should've used (or the guide recommended) compressed air to clean between the two screens. The hot roll was ineffective, essentially I just scraped be . . .

Mostrar más