Mi Problema
Battery wouldn't hold a charge
Mi Solucion
Replaced the battery but I the battery won't charge
Mi Consejo
Get an extra battery
Este producto no está disponible en tu país.
Codigo del Articulo: IF317-092-1
Este producto no está disponible en tu país.
USD 19.99
En venta
Partes usadas A-Stock están en excelente condicion
Partes B-Stock tienen un desgaste cosmético de menor importancia
Partes C-Stock tienen un mayor desgaste cosmético, pero son totalmente funcionales
USD 19.99
En venta
Agotado
No tenemos mucho stock disponible
Detalles del Producto
Descripción
Descripción
60w Classic style soldering iron from Hakko. This reliable dual-coil iron maintains a temperature of approximately 460 to 485 Celsius. Includes a chisel tip. Great iron for home and hobby use.
Cuentos de Reparación
Battery wouldn't hold a charge
Replaced the battery but I the battery won't charge
Get an extra battery
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemble though, so all worked out well.
One important piece of advice. The ifixit instructions list a #00 Philips screwdriver under tools however I needed a #0000 Philips to get the screws out.
After charging overnight my battery would go to red line in a few hours.
The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemb . . .
Los clientes también compraron
Productos Destacados