Prying and Opening Tool Assortment

  • Prying and Opening Tool Assortment
Prying and Opening Tool Assortment

USD9.99

USD9.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

Visita Nuestra Tienda

¿Alguna vez arreglaste algo? Eso es genial.

Comparte tu historia de reparación con #SoyUnGenio

Todos somos Genios

Comparte tu historia de reparación con #SoyUnGenio

Detalles del Producto

Descripción

Descripción

This tool assortment includes the most sought after Picks, Spudgers, Prying Tools, and more for electronics opening and component manipulation.

Includes:

Cuentos de Reparación

Avatar de usuario
John Fitzgerald's Story Photo #1310284

Mi Problema

The back button on my phone was operating as if it was being pressed randomly.

Mi Solucion

I've replaced the camera before (thanks to Ifixit), so the disassembly went smoothly.

Mi Consejo

Because it isn't specifically in the guide, there are a couple of small pieces (I think a speaker cover and the vibrator (for lack of a . . .

Avatar de usuario

Mi Problema

The microphone had stopped working on my wife's first gen Pixel phone and warranty had lapsed about a month before.

Mi Solucion

Repair went pretty smoothly. Don't have a microwave so couldn't use the iOpener gel tube that came with repair kit (tried putting it in hot water but didn't really work) so used hair dr . . .

Avatar de usuario

Mi Problema

My battery was at times barely lasting for half the day. It would randomly shut down even while displaying a reasonable amount of power remaining. Processor slowdown is real and painful.

Mi Solucion

Removing the adhesive on the battery was the most difficult part. The tabs ripped as soon as I tugged on them, . . .

Avatar de usuario

Mi Problema

My phone still works great, but the battery was so old that it just wouldn't hold a decent charge anymore. The phone was not designed for the battery to be user-replaceable.

Mi Solucion

IFixIt assured me of how to go about it. I researched online and finally found a reputable replacement battery supplier, and I . . .

Avatar de usuario

Mi Problema

Extend the life and keep these material out of landfill or contamination of other natons..

Mi Solucion

Perfect.

Mi Consejo

Not too hard, go for it!

Avatar de usuario

Mi Problema

My friend dropped my op1 and the red encoder hit the edge of the table. After the fall the red encoder only worked when holding pressure to the right and then spinning the encoder. Otherwise it would not register when turning it normally. I thought it just might be a mechanical issue but was not sur . . .

Mostrar más