Lead-Free Solder

  • Lead-Free Solder
Lead-Free Solder

$4.99

$4.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

GIVE TOOLS. FIX FOREVER.

GIVE TOOLS.

FIX FOREVER.

Spread the Fixmas cheer.

GIVE TOOLS. FIX FOREVER.

Spread the Fixmas cheer.

Detalles del Producto

Descripción

Descripción

Solder is used to create a non-permanent electrically conductive connection between non-ferrous metals. The relatively low melting point of lead/tin (Pb/SN) solder is a perfect match for sensitive electronic components. For applications where lead is not desired, one good substitute is "no lead" solder - usually a mixture of tin with a trace amount (0.3%) of copper. Note that most so-called "silver solders" are lead/tin with about 2% silver added.

  • Lead Free Solder. Coiled into convenient dispensing tube.
  • Melting point of 446/230 degrees F/C works well with our Soldering Kit.

Specifications:

  • Material: 99.3% SN, 0.7% Cu, rosin core
  • Weight: 0.5 oz / 14 g
  • Diameter: .04" / 1 mm
  • Melting Point: 446 ° F / 230 °C

Cuentos de Reparación

run4da's Story Photo #159336
run4da's Story Photo #159335
run4da's Story Photo #159338

Mi Problema

Battery was not holding a charge

Mi Solucion

I was definitely scared about attempting this project. The first challenge (prying open the antennae cover) was very daunting. I've uploaded a pic for illustration purposes - A is where I started to pry open the case, and B is the correct location for prying open the . . .

Mi Problema

Broken wire left the right side with no audio.

Mi Solucion

I've never soldered any actual damaged electronics before but it was a simple process and I nailed it first go after a few bead test right beforehand.

Mi Consejo

Research and understand what you are doing before handling soldering equipment near electronics. I had n . . .

Mi Problema

only 2 year old Kindle Fire . . . not charging

Mi Solucion

Not well - found problem, but wasn't able to fix it.

Mi Consejo

Don't buy a Kindle Fire!

Mi Problema

I teach an ipad repair class to a group of 8th graders. This order was just to replace some tools. We are going to give the isesamo tool a try. Our best tool so far has been a metal spudger. It has a triangular end an a curve spatula end. You sell one that looks like it but the spatula end is to du . . .

Mi Problema

the ground connection was broken and l put it in the shop to get the screen fixed and the shield the up by the display chip was gone the iphone work and l could hear sound but no picture and l looked up the iphone connection and the shield and the connection was gone so l have been look for the old . . .

Mi Problema

My son has had his iPod touch for about 2 or more years and the battery was at a point that the unit would not hold a charge for very long. He uses this thing continuously and it is important to him. I had seen on iFixit that you had a replacement battery and the tools/instructions on how to do it . . .

Mi Problema

After charging overnight my battery would go to red line in a few hours.

Mi Solucion

The repair went very smoothly. The hardest part was getting the ipod apart. The 7 Philips screws were difficult. Of the 7, 5 came out ok, but 2 had head damaged by the time I was done.... but there was enough left to reassemb . . .

Mostrar más