Repara tus cosas

Derecho a reparar

Partes y herramientas

ChipQuik SMD4.5 Solder Alloy

  • ChipQuik SMD4.5 Solder Alloy
ChipQuik SMD4.5 Solder Alloy

USD32.99

USD32.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

Kits de Reparación de Pantalla LCD de iPhone

La opción de presupuesto, cubierta por nuestra garantía de por vida.

Compra kits

Kits de Reparación de Pantalla LCD de iPhone

Reduce los costos de reparación, no la calidad.

Compra kits

Detalles del Producto

Descripción

Descripción

Easily remove SMD parts with Chip Quik® removal alloy

Reduce heat and reduce damage to circuit boards and SMD parts during removal. Low melting point of 58°C (136°F)

Use with SMD291 flux

(With solder iron or warm air bath)

- Apply flux to all leads.

- Melt CHIP QUIK® uniformly on all pins.

- Maintain alloy in molten state long enough to release chip.

- Lift chip from board with dental pick or vacuum pen.

CLEAN UP

- While molten, use cotton swab and flux to move excess to an unused section of board.

- While applying heat, polish each pad with a swab and flux until thoroughly clean.

- At room temperature, clean residue with alcohol pad.

- You are now ready to install the new chip.

4.5 ft of Chip Quik® material, removes up to 2700 SMD pins.

Specifications:

  • Length: 4.5 feet (8x 6.5" lengths)
  • Melting Point: 58°C (136°F)