MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board

  • MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board
  • 360°
360
MacBook Pro 17" Unibody (Early-Mid 2009) MagSafe DC-In Board

Condición: Usado

USD44.99

USD44.99

Te enviaremos un mensaje cuando el producto esté de regreso en stock.

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Kits de Reparación de Batería de MacBook Air

A partir de $69.99

Buy Now

Detalles del Producto

Descripción

Descripción

Is your laptop not charging correctly?

This part connects the wall adapter power to the logic board. A safe magnetic connection prevents damage to the laptop caused by tripping over the power cord. Identified by 820-2361-A printed on board.

Compatibilidad

Compatibilidad

  • MacBook Pro 17" Unibody A1297 Early 2009 or Mid 2009

Especificaciones

Especificaciones

Part #:
661-4950

Compatibilidad

MacBook Pro 17" Unibody
2.66 GHz (Early 2009)
2.8 GHz (Mid 2009)
2.93 GHz (Early 2009)
3.06 GHz (Mid 2009)

Cuentos de Reparación

Avatar de usuario

Mi Problema

DC-in port was defective. The charging connector would get hot and make a soft high pitched electronic "squeal." Eventually the two outer prongs on my chargers would melt down to little nubs to the point where the computer wouldn't even charge anymore. I let the damage get so bad that my DC-in port . . .

Avatar de usuario

Mi Problema

My MagSafe dc in board was charred from using an old charger (possibly wrong voltage) and continued to work, but only if the charger sat at a specific angle.

Mi Solucion

WARNING My 2011 MBP 17" uses a Torx T6 as well as a Phillips#00, that was not mentioned in the ifixit guide, but luckily I was able to g . . .